Go to homepage
0,00 €*

For orders or inquiries from outside the EU/EEA, please contact us by clicking here.


Electronic Control System - Accessories - Cables

Filter products

LCS Cable Drum Extension (75m/250ft)
LCS Cable Drum Extension (75m/250ft)
Connects ARRI hand units and motor controllers for wired operation. Use with cable LCS to LCS (K2.0002136)Note: Not compatible with ALEXA Mini and ALEXA Mini LF

740,00 €*
Details
Cable CAM (16p) - Panaflex Millenium (0.4m)
Cable CAM (16p) - Panaflex Millenium (0.4m)
Connects Universal Motor Controller UMC-4 to Panaflex Millennium film camera. Provides camera record start/stop function and tally. Length: 0.4 m/1.3ft

580,00 €*
Details
ALEXA Ethernet Extension Cable (15.0m/50ft) KC 159-S
ALEXA Ethernet Extension Cable (15.0m/50ft) KC 159-S
Extends the Ethernet Remote Cable KC 157 (K2.72040.0) or Ethernet Remote Cable KC 158 (K2.72041.0). Three KC 159-S (15m) plus one Remote Cable can be combined for a maximum total length of 47 m (154 feet) or 46 m (151 feet).

430,00 €*
Details
Cable CAM (16p) - EXT (16p)
Cable CAM (16p) - EXT (16p)
Connects Universal Motor Controller CAM connector to the EXT connector on the ALEXA family of cameras. Provides camera RUN/STOP function, tally and camera status information on WCU-4. Enables WCU-4 ALEXA Remote License for ALEXA cameras without the Plus module.

390,00 €*
Details
Cable CAM (7p) - LANC/D-Tap (0.6m/2ft)
Cable CAM (7p) - LANC/D-Tap (0.6m/2ft)
Connects ARRI Radio Interface Adapter RIA-1/cforce RF motor/cmotion cPRO motor and camin to LANC connectors (e.g. Canon C300 / C500, Sony PXW-FX9 / PXW-FS7) and D-Tap power source. Provides camera RUN/STOP function and tally on ARRI and cmotion cPRO hand units. Length: 0.6m/2ft

330,00 €*
Details
Cable CAM (7p) - Sony Venice/F55 CTRL/D-Tap (0.6m/2ft)
Cable CAM (7p) - Sony Venice/F55 CTRL/D-Tap (0.6m/2ft)
Connects ARRI Radio Interface Adapter RIA-1/cforce RF motor/cmotion cPRO motor and camin to Sony F5/55/Venice cameras and D-Tap power source. Provides camera RUN/STOP function and tally. Length: 0.6m/2ft

330,00 €*
Details
Cable LENS/ENG (12p) - Hi (12p) analog
Cable LENS/ENG (12p) - Hi (12p) analog
Connects LCUBE CUB-2 to the 12 pin Hirose lens connector on the AMIRA/ALEXA Mini PL LDS Lens Mount, the B4 Lens Mount, and third party cameras. Enables camera auto-iris function while using Master Grips for focus and zoom. Supports analog iris control signals from ENG/EFP cameras. The cable can also be used to connect the 12-pin Hirose to the K2.0051099 LLA-1 Control Module. Length:0.3m/1ft.

330,00 €*
Details
Cable LBUS (angled) - LBUS (angled) (0.8m/2.6ft)
Cable LBUS (angled) - LBUS (angled) (0.8m/2.6ft)
Connects LBUS devices (e.g. Master Grips). Includes two angled LBUS connectors. Length: 0.8m/2.6ft

300,00 €*
Details
Cable LBUS (angled) - LBUS (angled) (0.2m/8in)
Cable LBUS (angled) - LBUS (angled) (0.2m/8in)
Connects LBUS devices (e.g. cforce motors). Includes two angled LBUS connectors. Length: 0.2m/8inches

300,00 €*
Details
Cable LBUS (angled) - LBUS (angled) (0.6m/1.9ft)
Cable LBUS (angled) - LBUS (angled) (0.6m/1.9ft)
Connects LBUS devices (e.g. Master Grips). Includes two angled LBUS connectors. Length: 0.6m/2ft

300,00 €*
Details
Cable LBUS (angled) - LBUS (angled) (0.3m/1ft)
Cable LBUS (angled) - LBUS (angled) (0.3m/1ft)
Connects LBUS devices (e.g. Master Grips and cforce motors). Includes one angled LBUS connector. Lenghth. (0.3m/1ft)

300,00 €*
Details
Cable CAM (16p) - LANC (0.5m/1.6ft)
Cable CAM (16p) - LANC (0.5m/1.6ft)
Connects Universal Motor Controller CAM connector to LANC connectors (e.g. Canon C300/500). Provides camera RUN/STOP function and tally. Length: 0.5m/1.6ft.Separate UMC-4 RS IN cable for power supply required.

290,00 €*
Details
Cable LBUS (angled) - EXT (6p) (straight) (0.8m/2.6ft)
Cable LBUS (angled) - EXT (6p) (straight) (0.8m/2.6ft)
Connects AMIRA, ALEXA Mini and ALEXA Mini LF EXT to LBUS devices (e.g. Master Grips). Includes one angled LBUS connector. Length: 0.8m/2.6ft

290,00 €*
Details
Cable LBUS (angled) - LBUS (straight) (1m/3.3ft)
Cable LBUS (angled) - LBUS (straight) (1m/3.3ft)
Connects LBUS devices (e.g. Master Grips and cforce motors). Includes one angled LBUS connector. Length: 1m/3.3ft

290,00 €*
Details
Cable LBUS (angled) - LBUS (straight) (0.35m/1.15ft)
Cable LBUS (angled) - LBUS (straight) (0.35m/1.15ft)
Connects LBUS devices (e.g. Master Grips and cforce motors). Includes one angled LBUS connector. Length: 0.35m/1.1ft

290,00 €*
Details
Cable LBUS (angled) - LBUS (straight) (0.8m/2.3ft)
Cable LBUS (angled) - LBUS (straight) (0.8m/2.3ft)
Connects LBUS devices (e.g. Master Grips and cforce motors). Includes one angled LBUS connector. Length: 0.80m/2.6ft

290,00 €*
Details
Cable LBUS (angled) - LCS (0.8m/2.6ft)
Cable LBUS (angled) - LCS (0.8m/2.6ft)
Connects LBUS devices (e.g. Master Grips) with LCS devices (e.g. ALEXA Plus/Studio cameras). Length: 0.80m/2.6ft

290,00 €*
Details
Cable LBUS Star-2 (0.4m/16in)
Cable LBUS Star-2 (0.4m/16in)
LBUS-Y-cable for additional power source (1x Fi m3p coupler, 2x Le m4p) Length: 0.4m/16in

290,00 €*
Details
Cable CAM (16p) - RED Weapon (0.5m/1.6ft)
Cable CAM (16p) - RED Weapon (0.5m/1.6ft)
Connects Universal Motor Controller UMC-4 to RED Weapon. Provides camera RUN/STOP function and tally. Length: 2x 0.5m/1.6ftNote: Do not use with RED DSMC2 BASE EXPANDER and RED EPIC!

270,00 €*
Details
Cable CAM (7p) - RED CTRL/D-Tap (0.6m/2ft)
Cable CAM (7p) - RED CTRL/D-Tap (0.6m/2ft)
Connects ARRI Radio Interface Adapter RIA-1, cforce mini RF motor, cmotion cPRO motor and cmotion camin to RED CTRL connector and D-Tap power. Connects directly to RED DSMC2, RED Weapon cameras while a breakout box is required to connect to RED DSMC3 cameras. Supports camera REC start/stop function, tally and control of EF lenses. Also supports camera status and camera control on ARRIs Hi-5 hand unit and cmotion cPRO hand unit (license required). Length: 0.6m/2ft.

270,00 €*
Details
Cable CAM (7p) - Sony Remote (8p)/D-Tap (0.8m/2.6ft)
Cable CAM (7p) - Sony Remote (8p)/D-Tap (0.8m/2.6ft)
Connects ARRI Radio Interface Adapter RIA-1, ARRI cforce mini RF, cmotion cPRO motor and cmotion camin to Sony Remote connector on Sony F5/F55/Venice cameras and to D-Tap power source. Supports camera REC start/stop function and tally. Also supports camera status and camera control on ARRI’s Hi-5 hand unit and cmotion cPRO hand unit (license required). Length: 0.8m/2.6ft.

270,00 €*
Details
ALEXA Ethernet Remote Cable (2.0m/6.6ft) KC 157-S
ALEXA Ethernet Remote Cable (2.0m/6.6ft) KC 157-S
Connects the Ethernet socket of the ALEXA, ALEXA XT, ALEXA SXT and ALEXA LF family of cameras (Lemo 10 pin) to the Ethernet socket on the RCU-4 (Lemo 10 pin). This is a good length cable when the RCU-4 is used close to the camera. Can be extended with ALEXA Ethernet Extension Cable (K2.72043.0).

260,00 €*
Details
ALEXA Ethernet Remote Cable (1.0m/3.3ft) KC 158-S
ALEXA Ethernet Remote Cable (1.0m/3.3ft) KC 158-S
Connects the Ethernet socket of the ALEXA, ALEXA XT, ALEXA SXT and ALEXA LF family of cameras (Lemo 10 pin) to the Ethernet socket on the RCU-4 (Lemo 10 pin). This is a good length cable when the RCU-4 is mounted on the camera. Can be extended with ALEXA Ethernet Extension Cable (K2.72043.0).

260,00 €*
Details
Cable CAM (16p) - EXT (6p) (0.5m/1.6ft)
Cable CAM (16p) - EXT (6p) (0.5m/1.6ft)
Connects Universal Motor Controller CAM connector to AMIRA, ALEXA Mini and ALEXA Mini LF EXT connector. Provides camera RUN/STOP function, tally and remote camera set up with ALEXA Remote Licence on WCU-4. Length: 0.5m/1.6ft.Note: ALEXA Mini and ALEXA Mini LF may not supply the UMC-4 with enough power to drive three motors at the same time. In this case, you may supply power from an additional power source through the RS IN connector (e.g. K2.0002668 Cable UMC-4 RS IN to D-Tap).

250,00 €*
Details
Cable CAM (16p) - F65 (0.5m/1.6ft)
Cable CAM (16p) - F65 (0.5m/1.6ft)
Connects Universal Motor Controller CAM connector to Sony F65. Provides camera RUN/STOP function. Length: 0.5m/1.6ftSeparate UMC-4 RS IN cable for power supply required.

250,00 €*
Details
Cable LBUS - LBUS (15m/49ft)
Cable LBUS - LBUS (15m/49ft)
LBUS cable (Le 4p, Le 4p). Length: 15m/49ft.

250,00 €*
Details
Cable SERIAL (7p) - LANC (0.4m/1.3ft)
Cable SERIAL (7p) - LANC (0.4m/1.3ft)
Connects LCUBE CUB-1 SERIAL connector to LANC connectors (e.g. Canon, Blackmagic Design). Length: 0.4 m/1.3ft

250,00 €*
Details
Cable CAM (7p) - EXT (16p) (0.8m/2.6ft)
Cable CAM (7p) - EXT (16p) (0.8m/2.6ft)
Connects ARRI Radio Interface Adapter RIA-1/cforce RF motor/cmotion cPRO motor and camin to the EXT connector of an ALEXA EV camera. Provides camera RUN/STOP function, tally and camera status information on ARRI and cmotion hand units. Length: 0,8m/2.6ft

250,00 €*
Details
Cable CAM (7p) - ENG (12p) (0.3m/1ft)
Cable CAM (7p) - ENG (12p) (0.3m/1ft)
Connects ARRI Radio Interface Adapter RIA-1/cforce RF motor/cmotion cPRO motor and camin to 12 pin Hirose lens connectors. Requires separate power source. Length: 0.3m/1ft

250,00 €*
Details
Cable CAM (16p) - RED EPIC (0.5m/1.6ft)
Cable CAM (16p) - RED EPIC (0.5m/1.6ft)
Connects Universal Motor Controller UMC-4 to RED Epic. Provides camera RUN/STOP function and tally. Length: 0.5m/1.6ft Separate UMC-4 RS IN cable for power supply required. Works with:- DSMC REDVOLT Expander- DSMC JETPACK Expander- DSMC V-Lock I/O Expander- REDCAST Module

230,00 €*
Details
Cable LBUS - LBUS (6m/20ft)
Cable LBUS - LBUS (6m/20ft)
LBUS cable (Le 4p, Le 4p). Length: 6m/20ft.

230,00 €*
Details
Cable LBUS - D-Tap (1.2m/4ft)
Cable LBUS - D-Tap (1.2m/4ft)
LBUS power cable to D-Tap (Le 4p, Anton Bauer 2p). Length: 1.2m/4ft.

230,00 €*
Details
Cable LBUS - D-Tap (0.8m/2.6ft)
Cable LBUS - D-Tap (0.8m/2.6ft)
LBUS power cable to D-Tap (Le 4p, Anton Bauer 2p). Length: 0.8m/2.6ft.

230,00 €*
Details
Cable LBUS - XLR (4p) (0.8m/2.6ft)
Cable LBUS - XLR (4p) (0.8m/2.6ft)
LBUS power cable to XLR 4 pin (Le 4p, XLR 4p). Length: 0.8m/2.6ft.

230,00 €*
Details
Cable CAM (7p) - D-Tap (0.5m/1.6ft)
Cable CAM (7p) - D-Tap (0.5m/1.6ft)
Connects ARRI cforce RF motor/cmotion cPRO motor and camin to D-Tap power source. Length: 0.5m/1.6ft

230,00 €*
Details
Cable CAM (16p) - Cooke/i (0.7m/2.3ft)
Cable CAM (16p) - Cooke/i (0.7m/2.3ft)
Connects Universal Motor Controllers to Cooke /i lenses. Length: 0.7m/2.3ft

230,00 €*
Details
Cable LCS (5p) - LCS (5p) (3.5m/11ft)
Cable LCS (5p) - LCS (5p) (3.5m/11ft)
Connects ARRI hand units and motor controllers for wired operation.

220,00 €*
Details
Cable LCS (5p) - LCS (5p) (coiled)
Cable LCS (5p) - LCS (5p) (coiled)
Connects ARRI hand units and motor controllers for wired operation.

220,00 €*
Details
Cable CAM (16p) - F55 (0.5m/1.6ft)
Cable CAM (16p) - F55 (0.5m/1.6ft)
Connects Universal Motor Controller CAM connector to Sony F5/F55/Venice and Panasonic Varicam 35 cameras. Provides camera RUN/STOP function and tally. Length: 0.5m/1.6ftSeparate UMC-4 RS IN cable for power supply required.

220,00 €*
Details
Cable LENS/ENG (12p) - Fujinon ZK lenses (0.5m/1.6ft)
Cable LENS/ENG (12p) - Fujinon ZK lenses (0.5m/1.6ft)
Connects EMC-1 to 20 pin connector on Fujinon ZK lenses. Additional power cable required. Length: 0.5m/1.6ft.

220,00 €*
Details
Cable LBUS - RS (0.8m/2.6ft)
Cable LBUS - RS (0.8m/2.6ft)
LBUS power cable to Fischer 3 pin (Le m4p, Fi m3p). Provides power but no RUN/STOP function. Length: 0.8m/2.6ft.

220,00 €*
Details
Cable LCS (5p) - LBUS (0.8m/2.6ft)
Cable LCS (5p) - LBUS (0.8m/2.6ft)
Connects Universal Motor Controller UMC-4 (from SUP 1.2) to cforce lens motors. This cable is also required to update firmware to cforce motors, Master Grips and LCUBE converters via WCU-4, UMC-4 and AMC-1. Length: 0.8m/2.6ft.Note: Requires motor power supply through the unused cforce motor LBUS connector (e.g. with K2.0006758 Cable LBUS to D-Tap).

220,00 €*
Details
Cable UDM - D-Tap (0.8m/2.6ft)
Cable UDM - D-Tap (0.8m/2.6ft)
Power supply cable. Connects the CAM (4p) connector on the UDM-1 to D-Tap power source. Length: 0.8m/2.6ft.

220,00 €*
Details
Cable CAM (7p) - LCS (5p) (0.8m/2.6ft)
Cable CAM (7p) - LCS (5p) (0.8m/2.6ft)
Connects CAM connector of Radio Interface Adapter RIA-1, cforce mini RF, cmotion cPRO motor and cmotion camin to LCS connector of ARRI ALEXA Plus type cameras. Provides camera REC start/stop, tally, camera setting and status information via Hi-5 hand unit and cmotion cPRO hand unit (license required). Length: 0.8m/2.6ft.

220,00 €*
Details
Cable SERIAL (7p) - F5/55 (0.4m/1.3ft)
Cable SERIAL (7p) - F5/55 (0.4m/1.3ft)
Connects LCUBE CUB-1 to Sony F5/F55/Venice cameras. Length: 0.4 m/1.3ft

210,00 €*
Details
Cable SERIAL (7p) - RED (0.4m/1.3ft)
Cable SERIAL (7p) - RED (0.4m/1.3ft)
Connects LCUBE CUB-1 SERIAL to RED CTRL connector. Length: 0.4 m/1.3ft

210,00 €*
Details
Cable CAM (10p) - LANC/D-Tap (0.5m/1.6ft)
Cable CAM (10p) - LANC/D-Tap (0.5m/1.6ft)
Connects SMC-1/EMC-1 and AMC-1 motor controllers to LANC connectors (e.g. Canon C300/500, Sony PXW-FS7) and D-Tap power source. Provides camera RUN/STOP function and tally. Length: 2x 0.5m/1.6ft

200,00 €*
Details
Cable LBUS - LBUS (3m/10ft)
Cable LBUS - LBUS (3m/10ft)
LBUS cable (Le 4p, Le 4p). Length: 3m/10ft.

200,00 €*
Details
Cable EXT (6p) - LCS (5p)
Cable EXT (6p) - LCS (5p)
Adapts ALEXA Mini, ALEXA Mini LF EXT connector to LCS cables.Note: Can not be used with ZMU-3/ZMU-3A.

200,00 €*
Details
Cable CAM (7p) - EXT (6p) (0.6m/2ft)
Cable CAM (7p) - EXT (6p) (0.6m/2ft)
Connects ARRI cforce RF motor/cmotion cPRO motor and camin to AMIRA and ALEXA Mini EXT connectors. Provides camera RUN/STOP function, tally and camera status information on ARRI and cmotion hand units. Length: 0.6m/2ft

200,00 €*
Details
Cable LBUS Star (0.2m/8in)
Cable LBUS Star (0.2m/8in)
LBUS cable distribution plug for additional power source (2x Le 4p female, 1x RS) Length: 0.2m/8in

200,00 €*
Details
Cable CAM (7p, f) - CAM (7p, m) (0.3m/1ft)
Cable CAM (7p, f) - CAM (7p, m) (0.3m/1ft)
CAM cable extension (Le 7p female, Le 7p male). Length: 0.3m/1ft

200,00 €*
Details
Cable SERIAL (7p) - Cine Tape (coiled)
Cable SERIAL (7p) - Cine Tape (coiled)
Connects Universal Motor Controllers and LCUBE CUB-1 to Cine Tape Measure.

200,00 €*
Details
Cable LBUS - LBUS (0.3m/1ft)
Cable LBUS - LBUS (0.3m/1ft)
LBUS cable (Le 4p, Le 4p). Length: 0.3m/1ft.

195,00 €*
Details
Cable D-Tap - RS/PWR IN (0.5m/1.6ft)
Cable D-Tap - RS/PWR IN (0.5m/1.6ft)
Cable D-Tap to PWR IN/RS Fischer-type 3pin (female). Provides power but no RUN/STOP function. Can be used to power a WVT-1, WVR-1 or UMC-4 from a camera or a power splitting box. Length: 0.5m/1.6ft

190,00 €*
Details
Cable RS IN - PSC (0.7m/2ft)
Cable RS IN - PSC (0.7m/2ft)
Connects RS IN connector on UMC-4 with Power System Connector (PSC) cables. Length: 0.7m/2ft.Additional Power Supply Connector (PSC) cable required.

190,00 €*
Details
Cable LBUS - LBUS (0.2m/8in)
Cable LBUS - LBUS (0.2m/8in)
LBUS cable (Le 4p, Le 4p). Length: 0.2m/8in

190,00 €*
Details
Cable LBUS - LBUS (0.5m/1.5ft)
Cable LBUS - LBUS (0.5m/1.5ft)
LBUS cable (Le 4p, Le 4p). Length: 0.5m/1.5ft.

190,00 €*
Details
Cable LBUS - LBUS (0.8m/2.6ft)
Cable LBUS - LBUS (0.8m/2.6ft)
LBUS cable (Le 4p, Le 4p). Length: 0.8m/2.6ft.

190,00 €*
Details
Cable LBUS - LBUS (1.5m/5ft)
Cable LBUS - LBUS (1.5m/5ft)
LBUS cable (Le 4p, Le 4p). Length: 1.5m/5ft.

190,00 €*
Details
Cable Fi (3p) - RS/PWR IN (3p) (0.25m/0.8ft)
Cable Fi (3p) - RS/PWR IN (3p) (0.25m/0.8ft)
Cable RS 24V Fischer-type 3pin (male) to PWR IN/RS Fischer-type 3pin (female). Provides power and RUN/STOP function. Can be used to power a WVT-1, WVR-1 or UMC-4 from a camera. Length: 0.25m/0.8ft

190,00 €*
Details
Cable CAM (7p) - RS (0.3m/1ft)
Cable CAM (7p) - RS (0.3m/1ft)
Connects ARRI cforce RF motor/cmotion cPRO motor and camin to RS connector. Provides camera RUN/STOP and tally function on ARRI and cmotion cPRO hand units. Works with ALEXA and AMIRA cameras. Length: 0.3m/1ft.

190,00 €*
Details
Cable CAM (7p) - LBUS (0.5m/1.6ft)
Cable CAM (7p) - LBUS (0.5m/1.6ft)
Connects ARRI RIA-1, ARRI cforce RF motor, cmotion cPRO motor and camin to LBUS devices or LBUS power source. Length: 0.5m/1.6ft

190,00 €*
Details
Cable CAM (7p) - LBUS (0.3m/1ft)
Cable CAM (7p) - LBUS (0.3m/1ft)
Connects ARRI RIA-1, ARRI cforce RF motor, cmotion cPRO motor and camin to LBUS devices or LBUS power source. Length: 0.3/1ft.

190,00 €*
Details
Cable CineTape - SERIAL (4p) (0.8m/2.6ft)
Cable CineTape - SERIAL (4p) (0.8m/2.6ft)
Connects the Radio Interface Adapter RIA-1 and the ALEXA 35 to a Cine Tape Measure. Length: 0.8m/2.6ft

180,00 €*
Details
Cable EXT (16p) - Cine Tape (0.5m/1.6ft)
Cable EXT (16p) - Cine Tape (0.5m/1.6ft)
Connects Cine Tape Measure to ALEXA EXT connector.Length: 1.5m/5ft.

175,00 €*
Details
Cable PWR OUT/12V (2p) - RS/PWR IN (3p) (0.5m/1.6ft)
Cable PWR OUT/12V (2p) - RS/PWR IN (3p) (0.5m/1.6ft)
Cable PWR OUT 12V Lemo-type 2pin (male) to PWR IN/RS Fischer-type 3pin (female). Provides power but no RUN/STOP function. Can be used to power a WVT-1, WVR-1 or UMC-4 from a camera, battery adapter plate or a power splitting box. Length: 0.5m/1.6ft

170,00 €*
Details
Cable UDM - SERIAL (4p) (0.5m/1.6ft)
Cable UDM - SERIAL (4p) (0.5m/1.6ft)
Connects UDM-1 to RIA-1.and to ALEXA 35. Length: 0.5m/1.6ft

170,00 €*
Details
Cable UDM - SERIAL (4p) (0.8m/2.6ft)
Cable UDM - SERIAL (4p) (0.8m/2.6ft)
Connects UDM-1 to RIA-1 and to ALEXA 35. Length: 0.8m/2.6ft

170,00 €*
Details
Cable UDM - SERIAL (7p) (1.5m/5ft)
Cable UDM - SERIAL (7p) (1.5m/5ft)
Connects UDM-1 to Universal Motor Controllers and LCUBE CUB-1.Length: 1.5m/5ft.

170,00 €*
Details
Cable UDM - RS (3p) (1.5m/5ft)
Cable UDM - RS (3p) (1.5m/5ft)
Connects the CAM connector on the UDM-1 to the RS connector on any ARRI camera in order to power the UDM-1.Note: This cable only provides power to the UDM and no data connection.

170,00 €*
Details
Cable UDM - EXT (16p) (0.5m/1.6ft)
Cable UDM - EXT (16p) (0.5m/1.6ft)
Connects the CAM connector on the UDM-1 to the EXT connector on ALEXA cameras in order to power the UDM and send data between camera and UDM. This allows the WCU-4 to display UDM values when the WCU-4 communicates wirelessly with any Plus or Studio ALEXA camera.

170,00 €*
Details
Cable CLM-4 (8p) - CLM/FIZ (12p) (0,8m/2.6ft)
Cable CLM-4 (8p) - CLM/FIZ (12p) (0,8m/2.6ft)
Connects CLM-4 motor with motor controllers.

170,00 €*
Details
Cable Hi (4p) - RS/PWR IN (3p) (0.5m/1.6ft)
Cable Hi (4p) - RS/PWR IN (3p) (0.5m/1.6ft)
Cable Hirose-type 4pin (male) to PWR IN/RS Fischer-type 3pin (female). Provides power but no RUN/STOP function. Can be used to power a WVT-1, WVR-1 or UMC-4 from a camera or a power splitting box. Length: 0.5m/1.6ft

160,00 €*
Details
Cable PWR OUT/12V (2p) - Le (5p) (0.5m/1.6ft)
Cable PWR OUT/12V (2p) - Le (5p) (0.5m/1.6ft)
Cable PWR OUT/12V connector Lemo-type 2p (male) to Lemo-type 5p (male). Can be used to power an external on-board monitor from an ARRI camera, WVR-1, battery adapter plate or a power splitting box. Length: 0.5m/1.6ft

160,00 €*
Details
Cable CAM (10p) - RS (3p) (0.5m/1.6ft)
Cable CAM (10p) - RS (3p) (0.5m/1.6ft)
Connects SMC-1, EMC-1 and AMC-1 motor controllers to ARRI RS connector. Provides camera RUN/STOP and tally function. Works with ALEXA and AMIRA cameras. Length: 0.5m/1.6ft

150,00 €*
Details
Cable CAM (10p) - Sony F5/55
Cable CAM (10p) - Sony F5/55
Connects SMC-1, EMC-1 and AMC-1 motor controllers to Sony F5/55/Venice and Panasonic Varicam 35 cameras. Provides camera RUN/STOP function and tally. Length: 0.5m/1.6ft

150,00 €*
Details
Cable CAM (10p) - RED EPIC/D-Tap
Cable CAM (10p) - RED EPIC/D-Tap
Connects SMC-1, EMC-1 and AMC-1 motor controllers to RED EPIC camera and D-Tap power source. Provides camera RUN/STOP function. Length: 2x 0.5m/1.6ft

140,00 €*
Details
Cable CAM (10p) - PSC
Cable CAM (10p) - PSC
Connects SMC-1, EMC-1 and AMC-1 with Power System Connector (PSC) cables. Length: 0.7m/2ft. Additional Power Supply Connector (PSC) cable required.

140,00 €*
Details
Cable CAM (10p) - EXT (7p) (0.5m/1.6tf)
Cable CAM (10p) - EXT (7p) (0.5m/1.6tf)
Connects SMC-1, EMC-1 and AMC-1 motor controllers to ALEXA Mini and ALEXA Mini LF EXT connector. Provides camera RUN/STOP function and tally. Length: 0.5m/1.6ftNote: ALEXA Mini and ALEXA Mini LF may not supply the AMC-1 with enough power to drive three cforce motors at the same time. In this case, you may supply power from an additional power source through the unused cforce motor LBUS connector (e.g. K2.0006758 Cable LBUS to D-Tap 0.8m/2.6ft).

140,00 €*
Details
Cable CAM (10p) - Red WEAPON (0.5m/1.6ft)
Cable CAM (10p) - Red WEAPON (0.5m/1.6ft)
Connects SMC-1, EMC-1 and AMC-1 to RED Weapon. Provides camera REC start/stop function and tally. Length: 2x 0.5m/1.6ftNote: Use cable only in combination with the RED DSMC² Jetpack/V-Lock I/O Expanders. Do not use it with RED DSMC² Base Expander and RED EPIC! Please read the RED Weapon manual carefully before using this product and be sure of following camera settings on RED Weapon: Menu > Settings > Setup >GPIO Synch: choose “Brain GPIO”SW In High: “Key Disabled”SW In Low: “Record: Toggle”GPO Function: “Recording Indicator Out”

140,00 €*
Details
Cable UDM Display (4p) - UDM Sensor (4p)
Cable UDM Display (4p) - UDM Sensor (4p)
Connects UDM-1 display unit to UDM-1 sensor unit.Length: 1.5m/5ft.

135,00 €*
Details
Cable PWR OUT/12V (2p) - MiniXLR (4p) (0.5m/1.6ft)
Cable PWR OUT/12V (2p) - MiniXLR (4p) (0.5m/1.6ft)
Cable PWR OUT/12V connector Lemo-type 2p (male) to Mini XLR 4p (female). Can be used to power an external on-board monitor from an ARRI camera, WVR-1, battery adapter plate or a power splitting box. Length: 0.5m/1.6ft

135,00 €*
Details
Cable CAM (10p) - D-Tap (0.5m/1.6ft)
Cable CAM (10p) - D-Tap (0.5m/1.6ft)
Connects SMC-1/EMC-1 and AMC-1 motor controllers to D-Tap power source. Length: 0.5m/1.6ft.

130,00 €*
Details
Cable CLM-5 (10p) - CLM/FIZ (12p) (0,8m/2.6ft)
Cable CLM-5 (10p) - CLM/FIZ (12p) (0,8m/2.6ft)
Connects CLM-5 motor with motor controllers.

120,00 €*
Details
Cable Antenna Extension (1.0m/3.3ft)
Connects an antenna (SMA) connector used for Wireless Video System (WVS), WiFi and Electronic Control System (ECS) on ALEXA camera bodies to an antenna. One angled and one straight connector. Length: 1.0m/3.3ft

120,00 €*
Details
Cable UDM - PSC (1.5m/5ft)
Cable UDM - PSC (1.5m/5ft)
Connects UDM-1 to ARRI PSC power cables.Length: 1.5m/5ft.

120,00 €*
Details
Expansion Cable for RED EPIC
Expansion Cable for RED EPIC
Enables access to RED Epic SYNC or CTRL sockets when using the Interface adapter UMC-3A CAM to RED EPIC/PSC (K2.65270.0) or the Cable UMC-4 to EPIC (K2.0002855).

120,00 €*
Details
Cable PWR OUT/12V (2p) - Hi (4p) (0.5m/1.6ft)
Cable PWR OUT/12V (2p) - Hi (4p) (0.5m/1.6ft)
Cable PWR OUT/12V connector Lemo-type 2p (male) to Hirose-type 4p (female). Can be used to power an external on-board monitor from an ARRI camera, WVR-1, battery adapter plate or a power splitting box. Length: 0.5m/1.6ft

110,00 €*
Details
Cable CLM-3 (7p) - CLM/FIZ (12p) (0,8m/2.6ft)
Cable CLM-3 (7p) - CLM/FIZ (12p) (0,8m/2.6ft)
Connects CLM-3 motor with motor controllers.

110,00 €*
Details
Cable PWR OUT/12V (2p) - LCS (5p) (0.3m/1ft)
Cable PWR OUT/12V (2p) - LCS (5p) (0.3m/1ft)
Powers ARRI hand units (WCU-4 and SXU-1) from a 2-Pin Lemo style power source.

100,00 €*
Details
Cable CAM (10p) - open end
Cable CAM (10p) - open end
Open-end cable with connector to SMC/EMC/AMC on one side. Length: 0.5m/1.6ft

95,00 €*
Details
Cable LDE-1 - CLM/FIZ (12p)
Cable LDE-1 - CLM/FIZ (12p)
Spare cable for the Lens Data Encoder LDE-1.

80,00 €*
Details
Cable RS/PWR IN - open end (1.5m/5ft)
Cable RS/PWR IN - open end (1.5m/5ft)
Cable with open leads (customer must attach their own connector) to PWR IN/RS Fischer-type 3pin (female). Length: 0.5m/1.6ftt

65,00 €*
Details
HDTV BNC Cable (0.3m/1ft)
HDTV BNC Cable (0.3m/1ft)

26,00 €*
Details
USB Micro Cable WVS
USB Micro Cable WVS
A standard USB Micro cable that can be used to update the software of the Wireless Video Receiver small WVR-1s.Note: Not compatible with the wireless video transmitter inside the ALEXA SXT W and ALEXA LF, the Wireless Video Transmitter WVT-1 and the Wireless Video Receiver WVR-1.

6,00 €*
Details