This set of adapter inserts allows to use the 1.8in ARTEMIS Gimbal on the Volt Post.Includes:K2.0040249 1x Lower clamp sleeve, 1.8in GimbalK2.0040250 1x Upper centering ring, 1.8in GimbalFor ARTEMIS Volt Post and M2 Post
12 V power cable to power the 360 EVO, SRH-3 and SRH-360 remote control panel, or a monitor via D-Tab.D-Tab to 4-pin XLR, 1,5m/5ft, 12VFor Remote Control Panel (RCP-2) of the 360 EVO, SRH-3 and SRH-360
Short 15 mm to 19 mm rod for the use of the Monitor Mount (K2.0014831). Diameter 15 mm and 19 mm, usable length 80 mm/3.15inFor Transvideo and Monitor Mount for SmallHD (K2.0014832) with the TRINITY Joystick Monitor mount Gen.1.For TRINITY Joystick Monitor mount Gen.1
This steel extenders with an outer diameter of 19mm allows a wide range of applications with the existing counterweights CW-2, CW-3, CW-4 in combination with rod mounting brackets such as the RMB-2, RMB-3, RMB-5, RMB-6, RMB-7, RMB-8. This set includes one extender with a female-female thread and a second extender with a male-female thread.includes:K2.0052729 1x 19mm, 3/8, Extension, Steel, F-FK2.0052728 1x 19mm, 3/8, Extension, Steel, M-F
This steel extender with an outer diameter of 19mm and with a female-female thread allows a wide range of applications with the existing counterweights CW-2, CW-3, CW-4 in combination with rod mounting brackets such as the RMB-2, RMB-3, RMB-5, RMB-6, RMB-7, RMB-8.
This steel extender with an outer diameter of 19mm and with a male-female thread allows a wide range of applications with the existing counterweights CW-2, CW-3, CW-4 in combination with rod mounting brackets such as the RMB-2, RMB-3, RMB-5, RMB-6, RMB-7, RMB-8.
The 3/8in extension allows additional counterweights to be mounted on the TRINITY Pendulum Gen.2. Attaching counterweights to the side of the top and bottom stages TST-1, TST-2, BST-1, BST-2. But also stacking two SAM Zero dovetail plates on top of each other to raise the COG of smaller cameras.For TRINITY Pendulum Gen.2, TST-1, TST-2, BST-1, BST-2, SSB-1, SSB-4, SAM Zero dovetail plate and any application based on a 3/8in thread.
Full-circle rotation on the roll axis360-degree rotation on the roll axis, revolving around the optical center of the lens, enables even more creativity for films, dramas, commercials, and music videos. Exceptionally dynamic roll-axis shots can be achieved by mounting the head to a crane, for example, or a cable cam above a live broadcast event.Wide variety of setup optionsThe robustly built remote head can be combined with a huge range of grip equipment, including cranes, dollies, cars, or even motorbikes. The 360 EVO performs reliably, regardless of whether the camera package is small and compact, or whether a cinematic setup with long zooms is required.Cross-compatible with TRINITY 2 hardwareThe 360 EVO is beautifully integrated into the CSS product family, by sharing the same cables, brackets, and SAM plates for mounting different cameras, and can be controlled by the same tools, such as ARRI’s Digital Remote Wheels DRW-1 and Digital Encoder Head DEH-2.LBUS connectivity enables efficient digital and metadata workflows, while the new software and GUI are focused on long-term Unreal Engine integration to facilitate virtual production.Intuitive user interfaceThe 360 EVO runs on the same software platform as the TRINITY 2 stabilizer. Its modular and highly responsive remote control panel features digital encoder buttons, manual control options, and the same popular and intuitive GUI 3.0 as TRINITY 2 displayed on its touchscreen monitor, making operation of the remote head easy and time-saving on set.includes:K2.0049722 1x 360 EVO Stabilized Remote HeadK2.0049724 1x RCP-2 EVO Remote Control PanelK2.0041201 1x Stabilizer Adapter Mount SAM-ZeroK2.0039443 1x Cam Pwr Gen.2, ALEXA 35, Mini, AMIRA, 24 V, 8-pinK2.0039448 1x Cam Pwr Gen.2, 4-pin XLR, 12 VK2.0041984 1x 12G HD SDI BNC Cable, 0,63m/25inK2.0019298 1x SRH Mitchell Mount, MetricK2.0019302 1x SRH FS CAN Bus Cable, 10m/32.8ftK2.0019306 1x SRH High-Capacity Battery Power Cable, 12V/24V, 0.5m/1.64ftK2.0021427 1x SRH High-Capacity Battery Power Cable 24V, 3-pin XLR, 10m/33ftK2.0021428 1x SRH High-Capacity Battery Power Cable 12V, 4-pin XLR, 10m/33ftK2.0038756 1x Wrench for SRH Castle Nut, Mitchell MountK2.0037206 2x 3/8in-16 Camera ScrewK2.0037205 1x Right-angled Hex Key 4mmK2.0037207 1x Zip bag for toolsK2.0042681 1x TRH-2 Ring Main Cable, Long, 0,75m/29.5inK2.0049726 1x Case 360 EVO Stabilized Remote HeadNOTEThe 360 EVO BASIC set does NOT include a joystick!To complete the initial order, at least one of the mandatory joystick sets must be ordered.Standard Joystick for SRH Remote Control Panel, RCP-2 (K2.0039880) Microforce Joystick for SRH Remote Control Panel, RCP-2 (K2.0039882) Broadcast Joystick for SRH Remote Control Panel, RCP-2 (K2.0039881)
360 EVO upgrade option for existing SRH-3 systems.includes:K2.0050593 1x 360 EVO Upgrade for SRH-3K2.0039443 1x Cam Pwr Gen.2, ALEXA 35, Mini, AMIRA, 24 V, 8-pinK2.0039448 1x Cam Pwr Gen.2, 4-pin XLR, 12 VK2.0042681 1x TRH-2 Ring Main Cable, Long, 0,75m/29.5inNOTEThe upgrade can only be carried out by a local ARRI service.
360 EVO upgrade option for existing SRH-360 systems.includes:K2.0050591 1x 360 EVO Upgrade for SRH-360K2.0039443 1x Cam Pwr Gen.2, ALEXA 35, Mini, AMIRA, 24 V, 8-pinK2.0039448 1x Cam Pwr Gen.2, 4-pin XLR, 12 VK2.0042681 1x TRH-2 Ring Main Cable, Long, 0,75m/29.5inNOTEThe upgrade can only be carried out by a local ARRI service.
Set including Small HD Cine 5 monitor and the new articulating arm with a 19mm clamp adapter for the MGT-2. K0.0044362 & K0.0044363)NOTETo complete the initial order, at least one of the mandatory monitor or monitor mounting sets must be ordered.Includes:K2.0048548 1x SmallHD Cine 5 Monitor, 5inK2.0048648 1x Adapter 19mm with 1/4in threadK2.0048700 1x Articulating arm, 5inTRINITY 2 only!
Set including 5in Transvideo Starlite monitor and the new articulating arm with a 19mm clamp adapter for the MGT-2. (K0.0044362 & K0.0044363)NOTETo complete the initial order, at least one of the mandatory monitor or monitor mounting sets must be ordered.Includes:K2.0006960 1x Transvideo StarliteHD5-ARRI OLED MonitorK2.0048648 1x Adapter 19mm with 1/4in threadK2.0048700 1x Articulating arm, 5inTRINITY 2 only!
Set including a 7in SmallHD 703 monitor and all needed adapters.includes:K2.0041765 1x SmallHD 703 MonitorK2.0042710 1x K2.0041723 1x Monitor Power, 12V, Lemo 0B 2-pin to 0B 2-pinK2.0041984 1x 12G HD SDI BNC Cable, 0,63m/25inK2.0042710 1x Monitor Bracket, Gen.2, 7in, SmallHDARTEMIS 2, artemis Gen.1 NOTE To complete the initial order, it is recommended to order one of the monitor sets or monitor brackets.
Cylindrical adapter into which an articulated arm with a 1/4 inch thread can be screwed.The adapter can be used in any bracket with clamps for 15mm rods.The adapter has a special counter-screw connection that keeps the articulated arm in position.
Cylindrical adapter into which an articulated arm with a 1/4 inch thread can be screwed.The adapter can be used in any bracket with clamps for 19mm rods.The adapter has a special counter-screw connection that keeps the articulated arm in position.
Additional standard joystick module for the SRH remote control. The standard joystick is mounted on the left side of the SRH remote control.NOTEBoth controllers can be installed by the operator himself, no additional service is required.For 360 EVO and SRH-3 and SRH-360 remote control panel.
The ARTEMIS 2 to ARTEMIS 2 Live conversion kits enable existing ARTEMIS 2 operators to convert their ARTEMIS 2 into a lightweight ARTEMIS 2 Live if required.The conversion can be done in a few minutes and gives the CSS owner / operator more flexibility to better manage the creative task.includes:K2.0052045 1x BHM-3 Artemis Live Battery Hanger PlateK2.0049885 2x CCB-2, CSS Clamp Bridge-2, 52, 19mmO5.15642.0 1x Hex Key 3mm/0.11inNOTEWhen ordering the ARTEMIS Live conversions set, the following components are mandatory and need to be ordered separately:K2.0052057 Power Cable 12V/12V In - 12V Hot Swap Out, BHM K2.0052139 Power Cable 12V/12V In - 12V/24V Out, BHMK2.0052140 Power Cable 12V/24V In - 12V/24V Out, BHM
ARTEMIS 2 Live Conversion Set, incl. 7-inch Monitor enable existing ARTEMIS 2 operators to convert their ARTEMIS 2 into a lightweight ARTEMIS 2 Live incl. a 7 inch monitor set if required. The conversion can be done in a few minutes and gives the CSS owner / operator more flexibility to better manage the creative task.includes:K2.0052045 1x BHM-3 Artemis Live Battery Hanger PlateK2.0049885 3x CCB-2, CSS Clamp Bridge-2, 52, 19mmO5.15642.0 1x Hex Key 3mm/0.11inK2.0041765 1x SmallHD 703 MonitorK2.0052172 1x Monitor Yoke SmallHD 7inK2.0050835 1x MMA-2 Monitor Mounting Adapter 2K2.0041984 1x 12G HD SDI BNC Cable, 0,63m/25inK2.0041723 1x Monitor Power, 12V, Lemo 0B 2-pin to 0B 2-pinK2.0010436 1x Hex Key 2mmNOTEWhen ordering the ARTEMIS 2 Live Conversion Set, incl. 7-inch Monitor, the following components are mandatory and need to be ordered separately:K2.0052057 Power Cable 12V/12V In - 12V Hot Swap Out, BHM K2.0052139 Power Cable 12V/12V In - 12V/24V Out, BHMK2.0052140 Power Cable 12V/24V In - 12V/24V Out, BHM
This special broadcast ready to shoot set comes with the short Volt center post, Gold-mount battery adapter, 7inch monitor, arm, vest, bracket, tally system, dovetail plate and cables.Key features: Payload up to 40 kg/88 lb, 2 x 12G video, 12V & 24V, LBUS, Tally wiring.includes:KK.0052647 1x ARTEMIS 2 Live Volt Shorty - No GimbalK2.0052057 1x Power Cable 12V/12V In - 12V Hot Swap Out, BHMK2.0040285 1x Gold Mount for BMS-1 / BMS-2K2.0010333 1x ARTEMIS VestKK.0020297 1x ARTEMIS Carbon Spring Arm, 23kg/50.7lb, Pro SetK2.0041765 1x SmallHD 703 MonitorK2.0052172 1x Monitor Yoke SmallHD 7inK2.0050835 1x MMA-2 Monitor Mounting Adapter 2K2.0049885 1x CCB-2, CSS Clamp Bridge-2, 52, 19mmK2.0041984 1x 12G HD SDI BNC Cable, 0,63m/25inK2.0041723 1x Monitor Power, 12V, Lemo 0B 2-pin to 0B 2-pinK2.0044490 1x Tally System Gen2 / HostK2.0044491 1x Tally System Gen2 / ClientK2.0010482 1x Tally Sensor Cable, Gen.1 & 2K2.0044143 2x Tally Gen.2 Pwr, TST-2, Fischer 3pin to Lemo 0S 3pin, 0,35m / 13.7inK2.0010436 1x Hex Key 2mmNOTEThe set does not include a gimbal or docking bracket.Additional battery adapters:K2.0040286 V-Mount for BMS-1 / BMS-2
This special broadcast ready to shoot set comes with the short Volt center post, V-mount battery adapter, 7inch monitor, arm, vest, bracket, tally system, dovetail plate and cables.Key features: Payload up to 40 kg/88 lb, 2 x 12G video, 12V & 24V, LBUS, Tally wiring.includes:KK.0052647 1x ARTEMIS 2 Live Volt Shorty - No GimbalK2.0052057 1x Power Cable 12V/12V In - 12V Hot Swap Out, BHMK2.0040286 1x V-Mount for BMS-1 / BMS-2K2.0010333 1x ARTEMIS VestKK.0020297 1x ARTEMIS Carbon Spring Arm, 23kg/50.7lb, Pro SetK2.0041765 1x SmallHD 703 MonitorK2.0052172 1x Monitor Yoke SmallHD 7inK2.0050835 1x MMA-2 Monitor Mounting Adapter 2K2.0049885 1x CCB-2, CSS Clamp Bridge-2, 52, 19mmK2.0041984 1x 12G HD SDI BNC Cable, 0,63m/25inK2.0041723 1x Monitor Power, 12V, Lemo 0B 2-pin to 0B 2-pinK2.0044490 1x Tally System Gen2 / HostK2.0044491 1x Tally System Gen2 / ClientK2.0010482 1x Tally Sensor Cable, Gen.1 & 2K2.0044143 2x Tally Gen.2 Pwr, TST-2, Fischer 3pin to Lemo 0S 3pin, 0,35m / 13.7inK2.0010436 1x Hex Key 2mmNOTEThe set does not include a gimbal or docking bracket.Additional battery adapters:K2.0040285 Gold Mount for BMS-1 / BMS-2
This special broadcast version comes with the short Volt center post. NOTE: The set does not include a gimbal or docking bracket.Key features: Payload up to 40 kg/88 lb, 2 x 12G video, 12V & 24V, LBUS, Tally wiring.includes:K2.0039300 1x BMS-2, Battery Mounting Base, Gen.2, (naked)K2.0052045 1x BHM-3 Artemis Live Battery Hanger PlateK2.0041201 1x Stabilizer Adapter Mount SAM-ZeroO5.15642.0 1x Hex Key 3mm/0.11inK2.0037757 1x Hinge for Battery Hanger Module, Gen.2, 19mm rodsK2.0049885 2x CCB-2, CSS Clamp Bridge-2, 52, 19mmK2.0040332 1x Post Main Cable, 3B, 16pinK2.0038249 1x TST-2, ARTEMIS Top Stage, Gen. 2, 16 pinK2.0049207 1x artemis Carbon Center Post, 1.74, Volt, Short, No Main CableK2.0037912 1x SSB-3, Stabilizer System Bracket for TRINITY, MAXIMA, SAM platesK2.0041327 1x Support Rods 305mm, 12in, 19mmK2.0040790 1x Support Rods 120mm, 4.7in, 19mmK2.0039975 1x BST-2, ARTEMIS 2 Bottom Stage, 16pinK2.0039448 1x Cam Pwr Gen.2, 4-pin XLR, 12 VK2.0041984 1x 12G HD SDI BNC Cable, 0,63m/25inK2.0040046 1x CSS Post Tool for ARTEMIS and TRINITYK2.0037460 1x Volt Pwr Cable 0B 3-pin to 0B 2-pin, 0.4 m/1.3ftNOTEWhen ordering KK.0052647 ARTEMIS 2 Live Volt Shorty - NoGimbal, the following components are mandatory and need to be ordered separately:K2.0052057 Power Cable 12V/12V In - 12V Hot Swap Out, BHM K2.0052139 Power Cable 12V/12V In - 12V/24V Out, BHMK2.0052140 Power Cable 12V/24V In - 12V/24V Out, BHMAvailable battery adapters:K2.0040285 Gold Mount for BMS-1 / BMS-2K2.0040286 V-Mount for BMS-1 / BMS-2
Key featuresPayload up to 40 Kg/88 lb12V & 24V high-capacity system and camera power supplyLBUS, CAN Bus, tally through2 x 12G video1.8in telescopic center post with fine trim length adjustment1.8in super-low friction gimbal with gimbal handle extensionRegulated high-capacity battery managementInterchangeable BMS-2 battery mountsBattery communicationincludes:K2.0038249 1x TST-2, ARTEMIS Top Stage, Gen. 2, 16 pinK2.0041201 1x Stabilizer Adapter Mount SAM-ZeroK2.0039443 1x Cam Pwr Gen.2, ALEXA 35, Mini, AMIRA, 24 V, 8-pinK2.0039448 1x Cam Pwr Gen.2, 4-pin XLR, 12 VK2.0041984 1x 12G HD SDI BNC Cable, 0,63m/25inK2.0010319 1x ARTEMIS Docking Bracket, 1.8inK2.0040046 1x CSS Post Tool for ARTEMIS and TRINITYO5.15642.0 1x Hex Key 3mm/0.11inK2.0010493 1x ARTEMIS Gimbal, 1.8inK2.0010569 1x Gimbal Handle Extender for 1.8in GimbalK2.0041474 1x ARTEMIS Carbon Center Post, 1.8in diameter, Short, No Main CableK2.0040332 1x Post Main Cable, 3B, 16pinK2.0039975 1x BST-2, ARTEMIS 2 Bottom Stage, 16pinK2.0037739 1x BHM-2, Battery Hanger Module, Gen.2K2.0037771 1x Power Cable, BHM-2 to TST, 12V, 24V, Bat. DataK2.0041327 1x Support Rods 305mm, 12in, 19mmK2.0040790 1x Support Rods 120mm, 4.7in, 19mmK2.0037757 1x Hinge for Battery Hanger Module, Gen.2, 19mm rodsK2.0039300 2x BMS-2, Battery Mounting Base, Gen.2, (naked)NOTETo complete the initial order, at least one of the mandatory battery mounting sets must be ordered.The customer can only put the system into operation if the basic set and the battery mounting set were ordered and delivered together.Mandatory battery sets:Gold Mount for BMS-1 / BMS-2, Set (K0.0044355)V-Mount for BMS-1 / BMS-2, Set (K0.0044356)B-Mount for BMS-2, Set (K0.0044357)Recommended optional monitor sets: SM7 Pro 3G Monitor Live Set (K0.0052196)SM7 Pro 3G Monitor Cine Set (K0.0052201)
Key featuresPayload up to 40 Kg/88 lb12V & 24V high-capacity system and camera power supplyLBUS, CAN Bus, tally through2 x 12G video1.8in telescopic center post with fine trim length adjustment1.8in super-low friction gimbalRegulated high-capacity battery managementInterchangeable BMS-2 battery mountsBattery communicationincludes:K2.0041201 1x Stabilizer Adapter Mount SAM-ZeroK2.0039443 1x Cam Pwr Gen.2, ALEXA 35, Mini, AMIRA, 24 V, 8-pinK2.0039448 1x Cam Pwr Gen.2, 4-pin XLR, 12 VK2.0041984 1x 12G HD SDI BNC Cable, 0,63m/25inK2.0010319 1x ARTEMIS Docking Bracket, 1.8inK2.0040046 1x CSS Post Tool for ARTEMIS and TRINITYK2.0010493 1x ARTEMIS Gimbal, 1.8inK2.0038249 1x TST-2, ARTEMIS Top Stage, Gen. 2, 16 pinK2.0010489 1x ARTEMIS Carbon Center Post, 1.8in diameterK2.0040332 1x Post Main Cable, 3B, 16pinK2.0039975 1x BST-2, ARTEMIS 2 Bottom Stage, 16pinK2.0037739 1x BHM-2, Battery Hanger Module, Gen.2K2.0037771 1x Power Cable, BHM-2 to TST, 12V, 24V, Bat. DataK2.0041327 1x Support Rods 305mm, 12in, 19mmK2.0040790 1x Support Rods 120mm, 4.7in, 19mmK2.0037757 1x Hinge for Battery Hanger Module, Gen.2, 19mm rodsK2.0039300 2x BMS-2, Battery Mounting Base, Gen.2, (naked)O5.15642.0 1x Hex Key 3mm/0.11inNOTETo complete the initial order, at least one of the mandatory battery mounting sets must be ordered.The customer can only put the system into operation if the basic set and the battery mounting set were ordered and delivered together. Mandatory battery sets:Gold Mount for BMS-1 / BMS-2, Set (K0.0044355)V-Mount for BMS-1 / BMS-2, Set (K0.0044356)B-Mount for BMS-2, Set (K0.0044357)Recommended optional monitor sets:SM7 Pro 3G Monitor Live Set (K0.0052196)SM7 Pro 3G Monitor Cine Set (K0.0052201)
This set enables an artemis Gen.1 to be upgraded to ARTEMIS 2.includes:K2.0041201 1x Stabilizer Adapter Mount SAM-ZeroK2.0039443 1x Cam Pwr Gen.2, ALEXA 35, Mini, AMIRA, 24 V, 8-pinK2.0039448 1x Cam Pwr Gen.2, 4-pin XLR, 12 VK2.0041984 1x 12G HD SDI BNC Cable, 0,63m/25inK2.0038249 1x TST-2, ARTEMIS Top Stage, Gen. 2, 16 pinK2.0040332 1x Post Main Cable, 3B, 16pinK2.0039975 1x BST-2, ARTEMIS 2 Bottom Stage, 16pinK2.0037739 1x BHM-2, Battery Hanger Module, Gen.2K2.0037771 1x Power Cable, BHM-2 to TST, 12V, 24V, Bat. DataK2.0041327 1x Support Rods 305mm, 12in, 19mmK2.0040790 1x Support Rods 120mm, 4.7in, 19mmK2.0037757 1x Hinge for Battery Hanger Module, Gen.2, 19mm rodsK2.0039300 2x BMS-2, Battery Mounting Base, Gen.2, (naked)O5.15642.0 1x Hex Key 3mm/0.11inNOTETo complete the initial order, at least one of the mandatory battery mounting must be ordered. The customer can only put the system into operation if the basic set and the battery were ordered and delivered together.Mandatory battery sets:Gold Mount for BMS-1 / BMS-2, Set (K0.0044355)V-Mount for BMS-1 / BMS-2, Set (K0.0044356)B-Mount for BMS-2, Set (K0.0044357) Recommended optional monitor sets: 7in Transvideo Stargate Monitor Set (K0.0044370)7in Small HD 703 Monitor Set (K0.0044371)
This special version comes with the Volt center post.It does not include a gimbal or docking bracket.Key features:Payload up to 40 Kg / 88 lb12V & 24V high-capacity system and camera power supplyLBUS, CAN Bus, tally through2 x 12G videoRegulated high-capacity battery managementInterchangeable BMS-2 battery mountsBattery communicationincludes:K2.0041201 1x Stabilizer Adapter Mount SAM-ZeroK2.0039443 1x Cam Pwr Gen.2, ALEXA 35, Mini, AMIRA, 24 V, 8-pinK2.0039448 1x Cam Pwr Gen.2, 4-pin XLR, 12 VK2.0041984 1x 12G HD SDI BNC Cable, 0,63m/25inK2.0040046 1x CSS Post Tool for ARTEMIS and TRINITYK2.0038249 1x TST-2, ARTEMIS Top Stage, Gen. 2, 16 pinK2.0036904 1x ARTEMIS Carbon Center Post, 1.74, VoltK2.0040332 1x Post Main Cable, 3B, 16pinK2.0039975 1x BST-2, ARTEMIS 2 Bottom Stage, 16pinK2.0037739 1x BHM-2, Battery Hanger Module, Gen.2K2.0037771 1x Power Cable, BHM-2 to TST, 12V, 24V, Bat. DataK2.0041327 1x Support Rods 305mm, 12in, 19mmK2.0040790 1x Support Rods 120mm, 4.7in, 19mmK2.0037757 1x Hinge for Battery Hanger Module, Gen.2, 19mm rodsK2.0039300 2x BMS-2, Battery Mounting Base, Gen.2, (naked)K2.0037460 1x Volt Pwr Cable 0B 3-pin to 0B 2-pin, 0.4 m/1.3ftK2.0037912 1x SSB-3, Stabilizer System Bracket for TRINITY, MAXIMA, SAM platesNOTETo complete the initial order, at least one of the mandatory battery mounting sets must be ordered.The customer can only put the system into operation if the basic set and the battery mounting set were ordered and delivered together.Mandatory battery sets:Gold Mount for BMS-1 / BMS-2, Set (K0.0044355)V-Mount for BMS-1 / BMS-2, Set (K0.0044356)B-Mount for BMS-2, Set (K0.0044357)Recommended optional monitor sets: SM7 Pro 3G Monitor Live Set (K0.0052196)
This special version comes with the short Volt center post. It does not include a gimbal or docking bracket.Key features: Payload up to 40 kg/88 lb, 12 V & 24 V high-capacity system and camera power supply, LBUS, CAN Bus, tally through 2 x 12G video, regulated high-capacity battery management, interchangeable BMS-2 battery mounts, battery communication.NOTETo complete the initial order, at least one of the mandatory battery mounting sets must be ordered.The customer can only put the system into operation if the basic set and the battery mounting set were ordered and delivered together.includes:K2.0041201 1x Stabilizer Adapter Mount SAM-ZeroK2.0049207 1x artemis Carbon Center Post, 1.74, Volt, Short, No Main CableK2.0037912 1x SSB-3, Stabilizer System Bracket for TRINITY, MAXIMA, SAM platesK2.0040790 1x Support Rods 120mm, 4.7in, 19mmK2.0041327 1x Support Rods 305mm, 12in, 19mmK2.0037757 1x Hinge for Battery Hanger Module, Gen.2, 19mm rodsK2.0037739 1x BHM-2, Battery Hanger Module, Gen.2K2.0038249 1x TST-2, ARTEMIS Top Stage, Gen. 2, 16 pinK2.0040332 1x Post Main Cable, 3B, 16pinK2.0039300 2x BMS-2, Battery Mounting Base, Gen.2, (naked)K2.0039975 1x BST-2, ARTEMIS 2 Bottom Stage, 16pinO5.15642.0 1x Hex Key 3mm/0.11inK2.0039443 1x Cam Pwr Gen.2, ALEXA 35, Mini, AMIRA, 24 V, 8-pinK2.0039448 1x Cam Pwr Gen.2, 4-pin XLR, 12 VK2.0040046 1x CSS Post Tool for ARTEMIS and TRINITYK2.0037771 1x Power Cable, BHM-2 to TST, 12V, 24V, Bat. DataK2.0037460 1x Volt Pwr Cable 0B 3-pin to 0B 2-pin, 0.4 m/1.3ftK2.0041984 1x 12G HD SDI BNC Cable, 0,63m/25inMandatory battery sets:Gold Mount for BMS-1 / BMS-2, Set (K0.0044355)V-Mount for BMS-1 / BMS-2, Set (K0.0044356)B-Mount for BMS-2, Set (K0.0044357)Recommended optional monitor sets:SM7 Pro 3G Monitor Live Set (K0.0052196)SM7 Pro 3G Monitor Cine Set (K0.0052201)
Redesigned cordura soft bag for all ARTEMIS spring arms. The new design allows users to place the vest around the spring arm soft bag. In this way, an extremely compact transport arm and vest can be achieved For all ARTEMIS spring arms.For all ARTEMIS spring arms
ARTEMIS carbon fibre telescopic centre post, 1.8in, no-tool clamp, torsion-free guided 1.5in inner post, fine trim adjustmentLength from 43cm to 72cm / 16.9in to 28.3inFor ARTEMIS 2, TRINITY 2, artemis Gen. 1, TRINITY Gen. 1
ARTEMIS carbon fibre telescopic centre post, 1.8in, no-tool clamp, torsion-free guided 1.5in inner post, fine trim adjustment.Length from 37cm / 14,56in to 46,5cm / 18,30inFor ARTEMIS 2, TRINITY 2, artemis Gen. 1, TRINITY Gen. 1
The ARTEMIS carbon spring arms offer a lightweight and optimized, state-of-the-art design. The absolutely friction-free ball bearings placed in the extremely stiff and torsion-free carbon fiber bones guarantee a prompt and smooth reaction of the arm. With a weight of only 4.5 kg/9.9 lb, the ARTEMIS carbon spring arms offer the best payload-to-weight ratio on the market. With standard industrial arm-to-vest connector.includes:K2.0010331 1x ARTEMIS Carbon Spring Arm, 23kg/50.7lbK2.0010435 1x Hex Key 6mm/1.4inK2.0010463 1x ARTEMIS Arm Soft BagK2.0010434 1x Hex Key 4mm/5.32inCapacity: 23kg/50.7lb
Docking Bracket for all ARTEMIS systems using the 1.8in post and the wide docking ring 2.5inFits C-Stands and Low-Boys with a 5/8in/15.8 mm spigot.For ARTEMIS 2, TRINITY 2, artemis Gen. 1, TRINITY Gen. 1
ARTEMIS gimbal for 1.8in ARTEMIS center posts, super-low friction, patented self-centering mechanism, no-tool gimbal clamp.NOTEFor ARTEMIS and TRINITY systems with a 1.8in center post and with the 1.8in Gimbal Adapter Set f. Volt Post (K0.0040291) for the Volt Post and M2 Post.
The Knurled Handle Gimbal Extension adds a second knurled handle to the upper side of the 1.8in ARTEMIS gimbal, giving more control and better handling when the rig is used in low mode.1.8in - length 52mm/2inNOTEFor ARTEMIS gimbal 1.8in
Modular center post extension to extent the 1.8in ARTEMIS center post by 21,6cm / 8.5in.1.8in, length 21,6cm / 8.5inLemo 3B 10 pinFor artemis Gen. 1 and TRINITY Gen.1 only!
Modular center post extension to extent the 1.8in artemis center post by 21,6cm / 8.5in.diameter 1.8in, length 21,6cm / 8.5inLemo 3B 16 pinFor ARTEMIS 2 and TRINITY 2
The new Super Post, 1.8in Gen.2 is a replacement center post for the standard center post which comes with the system. The new Super Post enables the camera in the ARTEMIS and TRINITY application to be placed and moved significantly higher or lower in the set.diameter 1.8in / Inner post 1.5inMax. length 199,8cm / 6.55ftMin. length: 119cm / 3,9ftLemo 3B 10pinIncluces:K2.0041993 1x Super Post Main Cable, 3B, 10-pinK2.0041103 1x ARTEMIS Carbon Super Post, Gen.2, 1.8inFor artemis Gen. 1 and TRINITY Gen. 1
The new Super Post, 1.8in Gen.2 is a replacement center post for the standard center post which comes with the system. The new Super Post enables the camera in the ARTEMIS and TRINITY application to be placed and moved significantly higher or lower in the set.diameter 1.8in / Inner post 1.5inMax. length 199,8cm / 6.55ftMin. length: 119cm / 3,9ftLemo 3B 16pinIncludes:K2.0041103 1x ARTEMIS Carbon Super Post, Gen.2, 1.8inK2.0041161 1x Super Post Main Cable, 3B, 16-pinFor ARTEMIS 2 and TRINITY 2
Highly adjustable and modular vest. Only extreme comfortable and modern fabrics are used for the ARTEMIS vest. Fits any operator with a height from 1.5m up to 2.1m / 4.9ft up to 6.56ftWeight: 4.5kg/9.9lbWith standard industrial vest-to-arm connector
This special broadcast version comes with the 1.8inch Gimbal and a short center post.Key features: Payload up to 40 kg/88 lb, 2 x 12G video, 12V & 24V, LBUS, Tally wiring.includes:K2.0041474 1x ARTEMIS Carbon Center Post, 1.8in diameter, Short, No Main CableK2.0049885 2x CCB-2, CSS Clamp Bridge-2, 52, 19mmK2.0010319 1x ARTEMIS Docking Bracket, 1.8inK2.0010493 1x ARTEMIS Gimbal, 1.8inK2.0052045 1x BHM-3 Artemis Live Battery Hanger PlateK2.0039300 1x BMS-2, Battery Mounting Base, Gen.2, (naked)K2.0039975 1x BST-2, ARTEMIS 2 Bottom Stage, 16pinK2.0010569 1x Gimbal Handle Extender for 1.8in GimbalK2.0037757 1x Hinge for Battery Hanger Module, Gen.2, 19mm rodsK2.0040332 1x Post Main Cable, 3B, 16pinO5.15642.0 1x Hex Key 3mm/0.11inK2.0041201 1x Stabilizer Adapter Mount SAM-ZeroK2.0040790 1x Support Rods 120mm, 4.7in, 19mmK2.0041327 1x Support Rods 305mm, 12in, 19mmK2.0038249 1x TST-2, ARTEMIS Top Stage, Gen. 2, 16 pinK2.0039448 1x Cam Pwr Gen.2, 4-pin XLR, 12 VK2.0041984 1x 12G HD SDI BNC Cable, 0,63m/25inK2.0040046 1x CSS Post Tool for ARTEMIS and TRINITYNOTEWhen ordering KK.0052630 ARTEMIS 2 Live 1.8in Shorty the following components are mandatory and need to be ordered separately:K2.0052057 Power Cable 12V/12V In - 12V Hot Swap Out, BHM K2.0052139 Power Cable 12V/12V In - 12V/24V Out, BHMK2.0052140 Power Cable 12V/24V In - 12V/24V Out, BHMAvailable battery adapters:K2.0040285 Gold Mount for BMS-1 / BMS-2K2.0040286 V-Mount for BMS-1 / BMS-2
Flexible battery mounting system for ARTEMIS 2 and TRINITY 2.B-Mount 12VNOTETo complete the initial order, at least one of the mandatory battery mounting sets must be ordered.
New modular and extremely flexible battery mounting system. The interchangeable battery holders can be changed quickly and easily. The electrical contact to the battery body is established via the so-called pogo pins. A special coding of the pogo pins makes it possible to identify the battery type and, if present, to communicate digitally with the battery.B-Mount 24VFor ARTEMIS 2, TRINITY 2For ARTEMIS 2, TRINITY 2
New and extremely flexible battery mounting system for ARTEMIS 2 and TRINITY 2.includes:K2.0040284 2x B-Mount for BMS-2B-Mount 24VNOTETo complete the initial order, at least one of the mandatory battery mounting sets must be ordered.
This baseplate fits to ALEXA Mini/Mini LF and is the common interface to the Compact Bridge Plate CBP-1/CBP-2 and Stabilizer Adapter Mount SAM-2. The BUD-2 is available separately to complement Stabilizer plates for CBP 225mm/9in, 355mm/14in and 450mm/18in.
The Battery Hanger Module Gen.2, BHM-2 is a future-proof, high-performance power supply for ARTEMIS and TRINITY camera stabilization systems. Regardless of the batteries used, whether 12 V or 24 V, the BHM-2 always supplies 12 V and 24 V for the camera and the accessories as required. If 12 V batteries are used, 24 V will be transformed from the 12 V, should 24 V power be required. It works the same way if only 24 V batteries are connected, then the needed 12 V power supply is down-transformed from the 24 V. With the BHM-2, up to three batteries (V-Mount, B-Mount and Gold Mount) can be connected to the BHM-2 and their power can be bundled. Since all batteries always work together, the intelligent battery management enables extremely long runtimes for the entire system, even with high consumption. This means that even very small and light batteries can be used, without having to worry about the overall life of the batteries. If the Battery Hanger Module BHM-2 is used with a TRINITY 2, the BHM-2 always supplies the necessary 24 V for the motors and at the same time 12 V for the control electronics.includes:K2.0037739 1x BHM-2, Battery Hanger Module, Gen.2K2.0037771 1x Power Cable, BHM-2 to TST, 12V, 24V, Bat. DataK2.0041327 1x Support Rods 305mm, 12in, 19mmK2.0040790 1x Support Rods 120mm, 4.7in, 19mmK2.0037757 1x Hinge for Battery Hanger Module, Gen.2, 19mm rodsNOTEUpgrade for artemis Gen.1 when using BST-1 (K2.0039977) Upgrade for TRINITY Gen.1 when using TST-1 (K2.0039687)For ARTEMIS 2, TRINITY 2 and artemis Gen.1 and TRINITY Gen.1 after adding other components
This external power cord allows the TRINITY 2 head to be powered when used as a standalone stabilizer mounted on the MSP-1 (K2.0015385) through the Battery Hanger Module (BHM-2), which was also detached from the rig.Lemo 2B 7pinLength: 2m / 6.5ftTRINITY 2 only!
New modular and extremely flexible battery mounting system. The interchangeable battery holders can be changed quickly and easily. The electrical contact to the battery body is established via the so-called pogo pins. A special coding of the pogo pins makes it possible to identify the battery type and, if present, to communicate digitally with the battery.includes.K2.0037707 3x BMS-1, Battery Mounting Base, Gen.2, (naked)K2.0040285 3x Gold Mount for BMS-1 / BMS-2Gold MountFor artemis Gen.1 and TRINITY Gen.1
New modular and extremely flexible battery mounting system. The interchangeable battery holders can be changed quickly and easily. The electrical contact to the battery body is established via the so-called pogo pins. A special coding of the pogo pins makes it possible to identify the battery type and, if present, to communicate digitally with the battery.includes:K2.0037707 3x BMS-1, Battery Mounting Base, Gen.2, (naked)K2.0040286 3x V-Mount for BMS-1 / BMS-2V-MountFor artemis Gen.1 and TRINITY Gen.1
The Battery Mounting System generation 2 contains two key components: The Battery Mounting Base BMS-2 for ARTEMIS and TRINITY generation 2, or BMS-1 for TRINITY generation 1. And the additional three battery mounts, which are available in B-Mount, V-Mount, and Gold Mount. Based on the three interchangeable battery mounts, the battery mounting system allows operators to adapt their ARTEMIS or TRINITY to the available batteries on site.Lemo 2B 4-pin.For ARTEMIS 2, TRINITY 2
Battery Mount Set for use as an additional power supply for 12V consumers such as monitors and wireless video transmitters. The tool-less clamp allows quick installation of the battery mount on the 19mm rods.Includes:K2.0048655 1x BMS-3, Battery Mounting Base nakedK2.0040285 1x Gold Mount for BMS-1 / BMS-2K2.0042837 1x CSS Clamp Bridge 52, 19mmK2.0036902 1x ERM D-Tap Pwr Cable, 0B Lemo 2-pin to D-Tap, 1m/3.2ftK2.0021422 1x 12V Battery Power Cable, D-Tab, 4-pin XLR, 1,5m/5ftThe BMS-3 can also be used on the rods of the DRW-1 ARRI Wheels, as well as with the TRINITY Gen. 1, TRINITY 2, and ARTEMIS 2.
Battery Mount Set for use as an additional power supply for 12V consumers such as monitors and wireless video transmitters. The tool-less clamp allows quick installation of the battery mount on the 19mm rods.Includes:K2.0048655 1x BMS-3, Battery Mounting Base nakedK2.0040286 1x V-Mount for BMS-1 / BMS-2K2.0042837 1x CSS Clamp Bridge 52, 19mmK2.0036902 1x ERM D-Tap Pwr Cable, 0B Lemo 2-pin to D-Tap, 1m/3.2ftK2.0021422 1x 12V Battery Power Cable, D-Tab, 4-pin XLR, 1,5m/5ftThe BMS-3 can also be used on the rods of the DRW-1 ARRI Wheels, as well as with the TRINITY Gen. 1, TRINITY 2, and ARTEMIS 2.
The Broadcast Joystick is a high-resolution 3-axis controller for the SRH remote control. The Broadcast Joystick offers a highly precise and tactile, optimized control of the pan and tilt axis of the remote head. The third axis can be used to control zoom or the roll axis.For 360 EVO and SRH-3 and SRH-360NOTETo complete the initial order, at least one of the mandatory joystick sets must be ordered. The controller can be installed by the operator themselves, no additional service is required.
The new ARTEMIS 2 bottom stage combines a very compact design with extremely high overall rigidity and a future-proof modular design. The conversion to the SAM dovetail plate standard enables a significantly higher rigidity of the dovetail bracket, which has been improved even further by a completely newly developed clamping mechanism. The new clamping mechanism allows the SAM dovetail plate to be picked up from above, as well as from behind or from the front.High-capacity 12 V/24 V, 2 x4G video, tally, 10-pinNOTE Upgrade for artemis Gen.1 with Lemo 3B 10-pin and two video linesFor artemis Gen.1
The new ARTEMIS 2 bottom stage combines a very compact design with extremely high overall rigidity and a future-proof modular design. The conversion to the SAM dovetail plate standard enables a significantly higher rigidity of the dovetail bracket, which has been improved even further by a completely newly developed clamping mechanism. The new clamping mechanism allows the SAM dovetail plate to be picked up from above, as well as from behind or from the front.High-capacity 12 V/24 V, 2 x 12G video, battery data, LBUS through, CAN Bus through, tally, 16-pinFor ARTEMIS 2, TRINITY 2
Steel C-stand with detachable Turtle BaseMax. height 155 cm/61inFor all ARTEMIS and TRINITY systemsNOTETo park the MAXIMA QL the Spider (K2.0010425) is needed
12V XLR high-capacity camera power cable, Lemo 1B 4-pin to XLR 4-pin, for video cameras, ARRIFLEX 16SR I, ARRI 16SR II, Aaton and other devices using a 4-pin XLR socket.LEMO 4-pin, 12V, high capacityBroadcast cameras XLR, 12VFor ARTEMIS 2, artemis Gen.1, TRINITY 2, TRINITY Gen.1, 360 EVO, SRH-3, SRH-360, MAXIMA
This special carbon post is required to use the M2 Volt (trademark) Gimbal with ARTEMIS 2 and older artemis systems, like the Cine Broadcast and the EFP HD. In order to precisely match the dimensions of the M2 Volt Gimbal, a special carbon post was designed and manufactured and precisely ground to the outer diameter of 1.74 inches. Like the 1.8in standard two section ARTEMIS carbon Post, the version for the Volt Gimbal has a fine trim length adjustment for the torsion-free guided 1.5in inner post.The Pro Set contains all necessary cables, mounting brackets, as well as an arm post with diameter 0.74in / 18,7mm for the Volt gimbal and a ballance pin for the ARTEMIS docking bracket.Telescopic length from 43 cm to 72 cm / 16.9in to 28.3inincludes:K2.0049207 1x artemis Carbon Center Post, 1.74, Volt, Short, No Main CableK2.0037460 1x Volt Pwr Cable 0B 3-pin to 0B 2-pin, 0.4 m/1.3ftK2.0037912 1x SSB-3, Stabilizer System Bracket for TRINITY, MAXIMA, SAM platesK2.0040244 1x Arm Post 0.74in / 18,7mm diameter, Volt GimbalK2.0049047 1x Docking Pin Sleeves for Tiffen Volt Gimbal
This special carbon post is required to use the M2 Volt (trademark) Gimbal with ARTEMIS 2 and older artemis systems, like the Cine Broadcast and the EFP HD.In order to precisely match the dimensions of the M2 Volt Gimbal, a special carbon post was designed and manufactured and precisely ground to the outer diameter of 1.74 inches.Like the 1.8in standard two section ARTEMIS carbon Post, the version for the Volt Gimbal has a fine trim length adjustment for the torsion-free guided 1.5in inner post.The Pro Set contains all necessary cables, mounting brackets, as well as an arm post with 0.74in / 18,7mm for the Volt gimbal and a Ballance Pin for the ARTEMIS docking bracket.Telescopic length from 43 cm to 72 cm / 16.9in to 28.3inincludes:K2.0036904 1x ARTEMIS Carbon Center Post, 1.74, VoltK2.0037460 1x Volt Pwr Cable 0B 3-pin to 0B 2-pin, 0.4 m/1.3ftK2.0037912 1x SSB-3, Stabilizer System Bracket for TRINITY, MAXIMA, SAM platesK2.0040244 1x Arm Post 0.74in / 18,7mm diameter, Volt GimbalK2.0049047 1x Docking Pin Sleeves for Tiffen Volt GimbalFor ARTEMIS 2 and artemis Gen. 1
Case including foam insert for 360 EVO. The case offers protection for the 360 EVO Stabilized Remote Head, the remote control, cables and tools.Outer dimensions:83,7cm x 59cm x 48cm / 32.94in x 23.53in x 18.87inWeight incl. Foam:19Kg / 41.88lbFor 360 EVO
Empty Pelican 1615 Air case for the use of the foam insert which comes with the TRINITY Gen.1 and artemis Gen.1 rigs.Inner dimensions:75.2cm x 39.4cm x 23.8cm / 29.59in x 15.50in x 9.38inOuter dimensions:82,8cm x 46,7cm x 28,0cm / 32.58in x 18.40in x 11.0inWeight: 6.4kg / 14.06lbFor artemis Gen. 1 and TRINITY Gen. 1
Empty SKB iSeries 4217-7 Case for the use of the foam insert which comes with the ARTEMIS 2 and TRINITY 2 rig.Inner dimensions:108cm x 43,2cm x 19,1cm / 42.51in x 10.0in x 7.51inOuter dimensions:114,3cm x 50,2cm x 21cm / 45.0in x 19.7in x 8.3in Weight: 11,1kg / 24.47lbFor ARTEMIS 2 and TRINITY 2
Peli 1780 Case without foam insert.Inner dimensions:104,4cm x 54,7cm x 37,8cm / 41.12in x 21.54in x 14.88inOuter dimensions:114cm x 64,3cm x 41,9cm / 44.90in x 25.32in x 16.50in Weight: 22,2kg / 49.00lbFor TRINITY 2
Peli 1780 Case with a special foam insert that makes it possible to transport the entire TRINITY 2 system in just one case.Inner dimensions:104,4cm x 54,7cm x 37,8cm / 41.12in x 21.54in x 14.88inOuter dimensions:114cm x 64,3cm x 41,9cm / 44.90in x 25.32in x 16.50in Weight: 22,2kg / 49.00lbincludes:K2.0044439 1x Case TRINITY 2 compl. System, Pelican 1780, emptyK2.0048282 1x Foam Inlay TRINITY 2 compl. System, Pelican 1780
Empty SKB case 3i-2317-14BE for the use of the foam insert which comes with the TRINITY 2 and TRINITY Gen.1 head.Inner dimensions:58,42cm x 43,18cm x 35,56cm / 23in x 17in x 14inOuter dimensions:65.10cm x 49.53cm x 39.69cm / 25.63in x 19.50in x 15.63inWeight: 9.25kg / 20.40lbFor TRINITY 2 and TRINITY Gen. 1
The new CCB-2 is an inexpensive alternative to the CSS Clamp Bridge 52 K2.0042837, which is used on all ARTEMIS 2 and TRINITY 2 battery mountings. The CCB-2 can be used, for example, to mount the SSB-6 onto the 19mm tubes of the ARTEMIS 2 and TRINITY 2. To use additional accessories, Nato-Rails can also be mounted on the CCB-2.
The CCP Live is based on the CCP-1 and has been expanded to include a HDMI downconverter, an HD SDI video out socket and a Tally out socket.This allows the operator to get a direct monitor video feed from the camera even when both video outputs are used for 2 x 6G video.The additional 1080 HD SDI video signal allows a control monitor to be connected to the camera if both video out sockets are already in use.If the camera is integrated into a multi-cam setup, the TALLY Gen. 2 system can be controlled via the Tally Out socket.Including:K2.0001967 1x L-BracketK2.0046784 1x CCP-LiveK2.0047286 1x Clamp 3/8in for RAB-1K2.0009337 1x Cable ALEXA Mini to CCP-1 0,5m/19inK2.0009367 1x Cable ALEXA Mini to MVF-1 0,5m/19inK2.0047301 1x Tally Trigger CCP-Live1080 HD SDI video downconverter.
Upgrade set that can be used to convert an existing CCP 1 into a CCP live.NOTEThis upgrade / conversion can only be carried out by the local ARRI service.Includes:K2.0001967 1x L-BracketK2.0047286 1x Clamp 3/8in for RAB-1K2.0047754 1x CCP-Live UpgradeK2.0009337 1x Cable ALEXA Mini to CCP-1 0,5m/19inK2.0009367 1x Cable ALEXA Mini to MVF-1 0,5m/19inK2.0047301 1x Tally Trigger CCP-Live
The TRINITY 2 Pan Axis Module can only be used with an existing TRINITY 2 head after it has been upgraded with a new additional communication socket panel interface.Contact the ARRI service in your region and schedule an upgrade appointment for the additional communication socket panel interface K2.0050768.Suggested price plus labor cost.
The Compact Lens Support CLS-1 fits directly to the front groove of the Stabilizer Plate for CBP 450mm/18in and 355mm/14in to supports heavier prime lenses and smaller zooms such as the Signature Zoom 16-32mm. With lenses with support height reach under the level of the stabilizer mount, The Stabilizer Systems Bracket SSB-2 19mm or 15mm is advised.
The set includes the counterweight consisting of two half shells and two Delrin adapters for the 1.8in and the 1.5in center post.The Delrin adapters make it possible to mount the counterweight on both the outer 1.8in post and the 1.5in telescoping inner post.The Counterweight is made of stainless steel.Weight: 800gr / 1.77lbFor ARTEMIS 2, TRINITY 2, artemis Gen.1, TRINITY Gen. 1 and other systems which provides a 1.5in inner post
The set consists of two different counterweights. The larger counterweight weighs 300 g/0.66 lb, the two smaller counterweights weigh 150 g/0.33 lb each. The larger counterweight is equivalent to the weight of a cforce mini motor, making it easier to get difficult camera setups into perfect balance. The 3/8 threads allow the weights to be screwed together, as well as easily attached to the camera. The counterweight can also be clamped to 19 mm rods via an RMB-3 clamp.Weight:300gr / 0.66lb150gr / 0.33lbFor TRINITY 2, TRINITY Gen. 1, 360 EVO, SRH-3, SRH-360, MAXIMA
