This set of adapter inserts allows to use the 1.8in ARTEMIS Gimbal on the Volt Post.Includes:K2.0040249 1x Lower clamp sleeve, 1.8in GimbalK2.0040250 1x Upper centering ring, 1.8in GimbalFor ARTEMIS Volt Post and M2 Post
ARTEMIS carbon fibre telescopic centre post, 1.8in, no-tool clamp, torsion-free guided 1.5in inner post, fine trim adjustmentLength from 43cm to 72cm / 16.9in to 28.3inFor ARTEMIS 2, TRINITY 2, artemis Gen. 1, TRINITY Gen. 1
ARTEMIS carbon fibre telescopic centre post, 1.8in, no-tool clamp, torsion-free guided 1.5in inner post, fine trim adjustment.Length from 37cm / 14,56in to 46,5cm / 18,30inFor ARTEMIS 2, TRINITY 2, artemis Gen. 1, TRINITY Gen. 1
Docking Bracket for all ARTEMIS systems using the 1.8in post and the wide docking ring 2.5inFits C-Stands and Low-Boys with a 5/8in/15.8 mm spigot.For ARTEMIS 2, TRINITY 2, artemis Gen. 1, TRINITY Gen. 1
ARTEMIS gimbal for 1.8in ARTEMIS center posts, super-low friction, patented self-centering mechanism, no-tool gimbal clamp.NOTEFor ARTEMIS and TRINITY systems with a 1.8in center post and with the 1.8in Gimbal Adapter Set f. Volt Post (K0.0040291) for the Volt Post and M2 Post.
The Knurled Handle Gimbal Extension adds a second knurled handle to the upper side of the 1.8in ARTEMIS gimbal, giving more control and better handling when the rig is used in low mode.1.8in - length 52mm/2inNOTEFor ARTEMIS gimbal 1.8in
Modular center post extension to extent the 1.8in ARTEMIS center post by 21,6cm / 8.5in.1.8in, length 21,6cm / 8.5inLemo 3B 10 pinFor artemis Gen. 1 and TRINITY Gen.1 only!
Modular center post extension to extent the 1.8in artemis center post by 21,6cm / 8.5in.diameter 1.8in, length 21,6cm / 8.5inLemo 3B 16 pinFor ARTEMIS 2 and TRINITY 2
The new Super Post, 1.8in Gen.2 is a replacement center post for the standard center post which comes with the system. The new Super Post enables the camera in the ARTEMIS and TRINITY application to be placed and moved significantly higher or lower in the set.diameter 1.8in / Inner post 1.5inMax. length 199,8cm / 6.55ftMin. length: 119cm / 3,9ftLemo 3B 10pinIncluces:K2.0041993 1x Super Post Main Cable, 3B, 10-pinK2.0041103 1x ARTEMIS Carbon Super Post, Gen.2, 1.8inFor artemis Gen. 1 and TRINITY Gen. 1
The new Super Post, 1.8in Gen.2 is a replacement center post for the standard center post which comes with the system. The new Super Post enables the camera in the ARTEMIS and TRINITY application to be placed and moved significantly higher or lower in the set.diameter 1.8in / Inner post 1.5inMax. length 199,8cm / 6.55ftMin. length: 119cm / 3,9ftLemo 3B 16pinIncludes:K2.0041103 1x ARTEMIS Carbon Super Post, Gen.2, 1.8inK2.0041161 1x Super Post Main Cable, 3B, 16-pinFor ARTEMIS 2 and TRINITY 2
Flexible battery mounting system for ARTEMIS 2 and TRINITY 2.B-Mount 12VNOTETo complete the initial order, at least one of the mandatory battery mounting sets must be ordered.
New modular and extremely flexible battery mounting system. The interchangeable battery holders can be changed quickly and easily. The electrical contact to the battery body is established via the so-called pogo pins. A special coding of the pogo pins makes it possible to identify the battery type and, if present, to communicate digitally with the battery.B-Mount 24VFor ARTEMIS 2, TRINITY 2For ARTEMIS 2, TRINITY 2
The Battery Hanger Module Gen.2, BHM-2 is a future-proof, high-performance power supply for ARTEMIS and TRINITY camera stabilization systems. Regardless of the batteries used, whether 12 V or 24 V, the BHM-2 always supplies 12 V and 24 V for the camera and the accessories as required. If 12 V batteries are used, 24 V will be transformed from the 12 V, should 24 V power be required. It works the same way if only 24 V batteries are connected, then the needed 12 V power supply is down-transformed from the 24 V. With the BHM-2, up to three batteries (V-Mount, B-Mount and Gold Mount) can be connected to the BHM-2 and their power can be bundled. Since all batteries always work together, the intelligent battery management enables extremely long runtimes for the entire system, even with high consumption. This means that even very small and light batteries can be used, without having to worry about the overall life of the batteries. If the Battery Hanger Module BHM-2 is used with a TRINITY 2, the BHM-2 always supplies the necessary 24 V for the motors and at the same time 12 V for the control electronics.includes:K2.0037739 1x BHM-2, Battery Hanger Module, Gen.2K2.0037771 1x Power Cable, BHM-2 to TST, 12V, 24V, Bat. DataK2.0041327 1x Support Rods 305mm, 12in, 19mmK2.0040790 1x Support Rods 120mm, 4.7in, 19mmK2.0037757 1x Hinge for Battery Hanger Module, Gen.2, 19mm rodsNOTEUpgrade for artemis Gen.1 when using BST-1 (K2.0039977) Upgrade for TRINITY Gen.1 when using TST-1 (K2.0039687)For ARTEMIS 2, TRINITY 2 and artemis Gen.1 and TRINITY Gen.1 after adding other components
The Battery Mounting System generation 2 contains two key components: The Battery Mounting Base BMS-2 for ARTEMIS and TRINITY generation 2, or BMS-1 for TRINITY generation 1. And the additional three battery mounts, which are available in B-Mount, V-Mount, and Gold Mount. Based on the three interchangeable battery mounts, the battery mounting system allows operators to adapt their ARTEMIS or TRINITY to the available batteries on site.Lemo 2B 4-pin.For ARTEMIS 2, TRINITY 2
Battery Mount Set for use as an additional power supply for 12V consumers such as monitors and wireless video transmitters. The tool-less clamp allows quick installation of the battery mount on the 19mm rods.Includes:K2.0048655 1x BMS-3, Battery Mounting Base nakedK2.0040285 1x Gold Mount for BMS-1 / BMS-2K2.0042837 1x CSS Clamp Bridge 52, 19mmK2.0036902 1x ERM D-Tap Pwr Cable, 0B Lemo 2-pin to D-Tap, 1m/3.2ftK2.0021422 1x 12V Battery Power Cable, D-Tab, 4-pin XLR, 1,5m/5ftThe BMS-3 can also be used on the rods of the DRW-1 ARRI Wheels, as well as with the TRINITY Gen. 1, TRINITY 2, and ARTEMIS 2.
Battery Mount Set for use as an additional power supply for 12V consumers such as monitors and wireless video transmitters. The tool-less clamp allows quick installation of the battery mount on the 19mm rods.Includes:K2.0048655 1x BMS-3, Battery Mounting Base nakedK2.0040286 1x V-Mount for BMS-1 / BMS-2K2.0042837 1x CSS Clamp Bridge 52, 19mmK2.0036902 1x ERM D-Tap Pwr Cable, 0B Lemo 2-pin to D-Tap, 1m/3.2ftK2.0021422 1x 12V Battery Power Cable, D-Tab, 4-pin XLR, 1,5m/5ftThe BMS-3 can also be used on the rods of the DRW-1 ARRI Wheels, as well as with the TRINITY Gen. 1, TRINITY 2, and ARTEMIS 2.
The new ARTEMIS 2 bottom stage combines a very compact design with extremely high overall rigidity and a future-proof modular design. The conversion to the SAM dovetail plate standard enables a significantly higher rigidity of the dovetail bracket, which has been improved even further by a completely newly developed clamping mechanism. The new clamping mechanism allows the SAM dovetail plate to be picked up from above, as well as from behind or from the front.High-capacity 12 V/24 V, 2 x4G video, tally, 10-pinNOTE Upgrade for artemis Gen.1 with Lemo 3B 10-pin and two video linesFor artemis Gen.1
The new ARTEMIS 2 bottom stage combines a very compact design with extremely high overall rigidity and a future-proof modular design. The conversion to the SAM dovetail plate standard enables a significantly higher rigidity of the dovetail bracket, which has been improved even further by a completely newly developed clamping mechanism. The new clamping mechanism allows the SAM dovetail plate to be picked up from above, as well as from behind or from the front.High-capacity 12 V/24 V, 2 x 12G video, battery data, LBUS through, CAN Bus through, tally, 16-pinFor ARTEMIS 2, TRINITY 2
Steel C-stand with detachable Turtle BaseMax. height 155 cm/61inFor all ARTEMIS and TRINITY systemsNOTETo park the MAXIMA QL the Spider (K2.0010425) is needed
This special carbon post is required to use the M2 Volt (trademark) Gimbal with ARTEMIS 2 and older artemis systems, like the Cine Broadcast and the EFP HD. In order to precisely match the dimensions of the M2 Volt Gimbal, a special carbon post was designed and manufactured and precisely ground to the outer diameter of 1.74 inches. Like the 1.8in standard two section ARTEMIS carbon Post, the version for the Volt Gimbal has a fine trim length adjustment for the torsion-free guided 1.5in inner post.The Pro Set contains all necessary cables, mounting brackets, as well as an arm post with diameter 0.74in / 18,7mm for the Volt gimbal and a ballance pin for the ARTEMIS docking bracket.Telescopic length from 43 cm to 72 cm / 16.9in to 28.3inincludes:K2.0049207 1x artemis Carbon Center Post, 1.74, Volt, Short, No Main CableK2.0037460 1x Volt Pwr Cable 0B 3-pin to 0B 2-pin, 0.4 m/1.3ftK2.0037912 1x SSB-3, Stabilizer System Bracket for TRINITY, MAXIMA, SAM platesK2.0040244 1x Arm Post 0.74in / 18,7mm diameter, Volt GimbalK2.0049047 1x Docking Pin Sleeves for Tiffen Volt Gimbal
This special carbon post is required to use the M2 Volt (trademark) Gimbal with ARTEMIS 2 and older artemis systems, like the Cine Broadcast and the EFP HD.In order to precisely match the dimensions of the M2 Volt Gimbal, a special carbon post was designed and manufactured and precisely ground to the outer diameter of 1.74 inches.Like the 1.8in standard two section ARTEMIS carbon Post, the version for the Volt Gimbal has a fine trim length adjustment for the torsion-free guided 1.5in inner post.The Pro Set contains all necessary cables, mounting brackets, as well as an arm post with 0.74in / 18,7mm for the Volt gimbal and a Ballance Pin for the ARTEMIS docking bracket.Telescopic length from 43 cm to 72 cm / 16.9in to 28.3inincludes:K2.0036904 1x ARTEMIS Carbon Center Post, 1.74, VoltK2.0037460 1x Volt Pwr Cable 0B 3-pin to 0B 2-pin, 0.4 m/1.3ftK2.0037912 1x SSB-3, Stabilizer System Bracket for TRINITY, MAXIMA, SAM platesK2.0040244 1x Arm Post 0.74in / 18,7mm diameter, Volt GimbalK2.0049047 1x Docking Pin Sleeves for Tiffen Volt GimbalFor ARTEMIS 2 and artemis Gen. 1
New modular and extremely flexible battery mounting system. The interchangeable battery holders can be changed quickly and easily. The electrical contact to the battery body is established via the so-called pogo pins. A special coding of the pogo pins makes it possible to identify the battery type and, if present, to communicate digitally with the battery.Gold-Mount 12VFor ARTEMIS 2, TRINITY 2After upgrade to BMS-1 also for artemis Gen.1 and TRINITY Gen.1
The Pendulum TPD-2 is one of the most important components of the TRINITY system, with its inconspicuous mode of operation. You could also call it the drop-down generator of the TRINITY system. In the minimum configuration, the pendulum has a mass of approx. 700 g/1.54 lb, which is attached to the rotating pendulum arm. Because of gravity, this mass is always directed towards the ground. The pendulum ensures that when the TRINITY is in high mode, i.e. the camera is at the top, the lower part of the TRINITY is heavier than the upper part. If the TRINITY is now moved from top to bottom, the mass of the pendulum still points downwards and is therefore now closer to the gimbal, which represents the central axis of rotation of the system. Now the side where the camera is located becomes heavier than the opposite side of the system, causing the camera to move towards the ground as if by itself.includes:K2.0036377 1x TPD-2, TRINITY Pendulum Gen. 2K2.0033569 4x Counterweight, CW-1, 150grFor TRINITY 2, TRINITY Gen. 1
A special power management cable that connects the batteries to the bottom stage / sled of the ARTEMIS 2 Live.There are three versions available: 2 x 12V in - 12V Hot Swap out (K2.0052057)2 x 12V in - 12V &24V out (K2.0052139)1 x 12V & 24V in - 12V &24V out (K2.0052140)NOTEARTEMIS 2 Live only!
A special power management cable that connects the batteries to the bottom stage / sled of the ARTEMIS 2 Live.There are three versions available: 2 x 12V in - 12V Hot Swap out (K2.0052057)2 x 12V in - 12V &24V out (K2.0052139)1 x 12V & 24V in - 12V &24V out (K2.0052140)NOTEARTEMIS 2 Live only!
A special power management cable that connects the batteries to the bottom stage / sled of the ARTEMIS 2 Live.There are three versions available: 2 x 12V in - 12V Hot Swap out (K2.0052057)2 x 12V in - 12V &24V out (K2.0052139)1 x 12V & 24V in - 12V &24V out (K2.0052140)NOTEARTEMIS 2 Live only!
12V power cable that connects the tally client module to the monitor's power input jack.Lemo 0B 2pin to 0B 2pinLength: 25cm / 9.84inFor Small HD and Transcideo monitors with Lemo ob 2pin socket only!
12V power cable that connects the tally client module to the monitor's power input jackLemo 0B 2pin to 0B 5pinLength: 25cm / 9.84inFor ARRI Transvideo monitor with Lemo 0b 5pin socket only!
Power / Tally cable that connects the Tally client module to the TRINITY Gen.1 Joystick Mount.Lemo 0B 5pin to 0S 3pinLength: 0,25m / 9.8inFor TRINITY Gen.1 only!
The new generation of the Tally system is now fully digital. This guarantees constant luminosity in the host and client modules, regardless of whether the tally LED on the camera is bright.The set includes the Tally host and client module as well as all required cables.Includes:K2.0044490 1x Tally System Gen2 / HostK2.0044491 1x Tally System Gen2 / ClientK2.0010482 1x Tally Sensor Cable, Gen.1 & 2K2.0044143 2x Tally Gen.2 Pwr, TST-2, Fischer 3pin to Lemo 0S 3pin, 0,35m / 13.7inFor ARTEMIS 2 only.
The new generation of the Tally system is now fully digital. This guarantees constant luminosity in the host and client modules, regardless of whether the tally LED on the camera is bright.The set includes the Tally host and client module as well as all required cables.Includes:K2.0044490 1x Tally System Gen2 / HostK2.0044491 1x Tally System Gen2 / ClientK2.0010482 1x Tally Sensor Cable, Gen.1 & 2K2.0044142 2x Tally Gen.2 Pwr, TST-1, Lemo 0S 3pin to 0S 3pin, 0,35m / 13.7inFor artemis Gen.1 only!
The new generation of the Tally system is now fully digital. This guarantees constant luminosity in the host and client modules, regardless of whether the tally LED on the camera is bright.The set includes the Tally host and client module as well as all required cables.Includes:K2.0044490 1x Tally System Gen2 / HostK2.0044491 1x Tally System Gen2 / ClientK2.0010482 1x Tally Sensor Cable, Gen.1 & 2K2.0044146 2x Tally Gen.2 Pwr, TRH-2, Fischer 3pin to Lemo 0S 3pin, 0,75m / 29.5inK2.0044374 1x Tally Gen.2 Mon Pwr, Lemo 0B 2pin to 0B 5pin, 25cm / 9.84inK2.0044147 1x Tally Gen.2 Mon Pwr, Lemo 0B 2pin to 0B 2pin, 25cm / 9.84inFor TRINITY 2 only.
The new generation of the Tally system is now fully digital. This guarantees constant luminosity in the host and client modules, regardless of whether the tally LED on the camera is bright.The set includes the Tally host and client module as well as all required cables.Includes:K2.0044490 1x Tally System Gen2 / HostK2.0044491 1x Tally System Gen2 / ClientK2.0010482 1x Tally Sensor Cable, Gen.1 & 2K2.0044142 1x Tally Gen.2 Pwr, TST-1, Lemo 0S 3pin to 0S 3pin, 0,35m / 13.7inK2.0044260 1x Tally Gen.2 Mon Pwr, Lemo 0B 5pin to 0S 3pin, 0,25m / 9.8inK2.0044374 1x Tally Gen.2 Mon Pwr, Lemo 0B 2pin to 0B 5pin, 25cm / 9.84inK2.0044147 1x Tally Gen.2 Mon Pwr, Lemo 0B 2pin to 0B 2pin, 25cm / 9.84inFor TRINITY Gen.1 only!
Tally Sensor Cable can be used with the first and second generation of the Tally system.Lemo 0S 4pinLength: 0,55m / 1.80 ftFor Tally system Gen.1 & Gen.2
The new generation of the Tally system is now fully digital. This guarantees constant luminosity in the host and client modules, regardless of whether the tally LED on the camera is bright.The set includes the Tally host and client module as well as all required cables.includes:K2.0050415 1x Trinity Live Cabel MGT (1.3m/4.2ft)K2.0044490 1x Tally System Gen2 / HostK2.0044491 1x Tally System Gen2 / ClientK2.0010482 1x Tally Sensor Cable, Gen.1 & 2K2.0044142 1x Tally Gen.2 Pwr, TST-1, Lemo 0S 3pin to 0S 3pin, 0,35m / 13.7inK2.0044374 1x Tally Gen.2 Mon Pwr, Lemo 0B 2pin to 0B 5pin, 25cm / 9.84inK2.0044147 1x Tally Gen.2 Mon Pwr, Lemo 0B 2pin to 0B 2pin, 25cm / 9.84inFor TRINITY Gen.1 Live with MGT-2 Upgrade only!
The side-to-side fine adjustment upgrade for TRINITY Gen. 1 can only be performed in conjunction with the DUB-3 (K2.0040347).Note: If the TRINITY was manufactured before June 2019, please contact your local ARRI service. It may be that other parts have to be exchanged.
Power / Tally cable that connects the Tally client module to the TRINITY Gen.1 Live head.Lemo 0S 6pin to Lemo 0S 3pinLength: 1.3m/4.2ftFor TRINITY Gen.1 Live with MGT-2 Upgrade only!
The new ARTEMIS 2 top stage combines a very compact design with extremely high overall rigidity and a future-proof modular design. The conversion to the SAM dovetail plate standard enables a significantly higher rigidity of the dovetail bracket, which has been improved even further by a completely newly developed clamping mechanism. The new clamping mechanism allows the SAM dovetail plate to be picked up from above, as well as from behind or from the front. The new design allows fore and aft to be adjusted from both sides, as well as side-to-side positioning.High-capacity 12 V/24 V, 2 x 4G video, tally, 10-pinNOTEUpgrade for artemis Gen.1 with Lemo 3B 10-pin and two video lines Recommended power cable: K2.0039443 Cam Pwr Gen.2, ALEXA 35, Mini, AMIRA, 24 V, 8-pinK2.0039446 Cam Pwr Gen. 2, Alexa LF, 24V, 2-pin FischerFor artemis Gen.1
The new ARTEMIS 2 top stage combines a very compact design with extremely high overall rigidity and a future-proof modular design. The conversion to the SAM dovetail plate standard enables a significantly higher rigidity of the dovetail bracket, which has been improved even further by a completely newly developed clamping mechanism. The new clamping mechanism allows the SAM dovetail plate to be picked up from above, as well as from behind or from the front. The new design allows fore and aft to be adjusted from both sides, as well as side-to-side positioning.High-capacity 12 V/24 V, 2 x 12G video, battery data, LBUS through, CAN Bus through, tally, 16-pinFor ARTEMIS 2, TRINITY 2
New modular and extremely flexible battery mounting system. The interchangeable battery holders can be changed quickly and easily. The electrical contact to the battery body is established via the so-called pogo pins. A special coding of the pogo pins makes it possible to identify the battery type and, if present, to communicate digitally with the battery.V-Mount 12VFor ARTEMIS 2, TRINITY 2After upgrade to BMS-1 also for artemis Gen.1 and TRINITY Gen.1
