To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

For orders or inquiries from outside the EU/EEA, please contact us by clicking here.

PCA: Mechanical Accessories - Matte Boxes - Accessories

Pro Set Diopter Accessory 138mm/4,5 inch

Pro Set Diopter Accessory 138mm/4,5 inch

This set includes one Diopter Stage, one Diopter Adapter and three Diopter Frames including all pouches. With this set rentals could offer their diopter set (+0.5, +1, +2 each in a Diopter Frame and +3 in a Diopter Stage) for best storage to avoid any damages on the glass.K2.0013740 3x Diopter Frame 138mmK2.0014745 1x Diopter Stage 138mmK2.0014357 1x Diopter Adapter 138mm to 4.5inK2.0020158 3x Pouch Rota Pola 4x5/Diopter Frame 138K2.0020157 1x Pouch Diopter Stage 138

1.990,00 €*

LMB 6x6 Swing Away Tilt Mod. 15mm Studio

LMB 6x6 Swing Away Tilt Mod. 15mm Studio

This module offers a comfortable swing-away with extension for easier lens changes, as well as an integrated tilt module for 10° up and down adjustments to avoid unwanted reflections.For use with 15mm studio rod system.

1.020,00 €*

LMB 6x6 Swing Away Tilt Mod. 19mm Studio

LMB 6x6 Swing Away Tilt Mod. 19mm Studio

This module offers a comfortable swing-away with extension for easier lens changes, as well as an integrated tilt module that allows 10° up and down adjustments to avoid unwanted reflections.For use with 19mm studio rod system.

995,00 €*

LMB 6x6 Extra Rotatable Filter Stage

LMB 6x6 Extra Rotatable Filter Stage

The Extra Rotatable Filter Stage gives the possibility to rotate an additional 6.6x6.6 filter 360°. It attaches to the Basic Module by sliding to the rear and fixed by two thumb screws without the need for any tools. For extreme lightweight applications such as gimbal and Steadicam the separate single filter stage works perfectly in conjunction with any clamp or the tilt and flex adapter. Each filter frame is secured with an extra tray catcher which holds the filters in place perfectly.

955,00 €*

LMB 6x6 Side Flags

LMB 6x6 Side Flags

The carbon fiber Side Flags, each including one extendable wing to prevent possible image quality loss caused by stray light. The combination of top and side flags will fold flat allowing the LMB 6x6 to be stored easily without detaching any components. Please note that K2.0013825 LMB Flag Holders are required.

910,00 €*

Diopter Stage 6in

Diopter Stage 6in

The diopter stage can be used at the back of a 6.6x6.6 clip-on a matte box, or independently with a rear-mounted clamp adapter. Diopters up to +3 can be fitted, and the position of split diopters can be adjusted with an integrated friction wheel. As with the diopter frame, a safety device and 1/4 mounting threads are included. Compatible with LMB 6x6 and LMB-6.

835,00 €*

LMB 6x6 Top, Bottom Flag

LMB 6x6 Top, Bottom Flag

The carbon fiber Top, Bottom Flag including two extendable wings to prevent possible image quality loss caused by stray light. It can be fitted to the top or at the bottom of the LMB 6x6 Basic Module and will cover the opening of the sunshade 100% for best protection during a break.

750,00 €*

LMB 4x5 Swing Away Tilt Module

LMB 4x5 Swing Away Tilt Module

The module offers a comfortable swing-away with extension for easier lens changes, as well as an integrated tilt module for 10° up and down adjustments to avoid unwanted reflections.It can be mounted directly in 15mm rods. In combination with the LMB 19mm Studio Rod Adapter (K2.0013432) or LMB 15mm Studio Rod Adapter (K2.0013440) it fits to both Studio Rod Support standards 19 and 15mm.

690,00 €*

LMB 4x5 Side Flags

LMB 4x5 Side Flags

A set of two carbon fiber side flags, each extendable on the top. Please note that K2.0013825 LMB Flag Holders are required.

670,00 €*

Side Flag Set for MMB-2

Side Flag Set for MMB-2

includes:K2.66150.0 1x Side Flag leftK2.66148.0 1x Side Flag rightK2.66134.0 2x Side Flag Holder

660,00 €*

LMB 4x5 Extra Rotatable Filter Stage

LMB 4x5 Extra Rotatable Filter Stage

An optional 360° rotatable third filter stage for the LMB 4x5, with integrated tray catcher. Can be used as a stand-alone filter stage with all LMB 4x5 clamp adapters.

640,00 €*

Diopter Stage 138mm

Diopter Stage 138mm

The diopter stage can be used at the back of a 4x5.65 clip-on a matte box, or independently with a rear-mounted clamp adapter. Diopters up to +3 can be fitted, and the position of split diopters can be adjusted with an integrated friction wheel. As with the diopter frame, a safety device and 1/4 mounting threads are included. Compatible with LMB 4x5, LMB-25, LMB-15 and LMB-5.

590,00 €*

Diopter Frame 6in

Diopter Frame 6in

The diopter frame allows 6 inch diopters of up to +1 and in combinations with the Diopter Adapter 6in to 138mm, up to +2 Diopter. The frame is compatible with the ARRI LMB 6x6, LMB-6 and SMB-1. The frame has the width of two 6.6x 6.6 filter frames and fits into a 2- or 3-filter stage. A safety mechanism prevents the diopter from falling out of the frame during exchange, while two 1/4 threads permit the frame to be attached to an articulating arm.

570,00 €*

LMB 6x6 Extra Non-Rotatable Filter Stage

LMB 6x6 Extra Non-Rotatable Filter Stage

The Extra Non-Rotatable Filter Stage makes it possible to use an additional 6.6x6.6 filter. It attaches to the Basic Module by sliding to the rear and fixed by two thumb screws without using any tools. For extreme lightweight applications such as gimbal and Steadicam the separate single filter stage works perfectly in conjunction with any clamp, or the tilt and flex adapter. Each filter frame is secured with an extra tray catcher which holds the filters in place perfectly. The LMB 6x6 sunshade can be mounted directly to the front of the filter stage.

530,00 €*

LMB 4x5 Top/Bottom Flag

LMB 4x5 Top/Bottom Flag

A carbon fiber flag, with two extensions,which can be mounted at the top or the bottom of the LMB 4x5 – compatible with LMB-5, LMB-15, and LMB-25.

520,00 €*

Diopter Frame 138mm

Diopter Frame 138mm

The diopter frame allows 138 mm diopters of up to +2 to be used in a lightweight matte box such as the ARRI LMB 4x5 or LMB-25. The frame has the width of two 4x 5.65 filter frames and fits into a 2- or 3-filter stage. A safety mechanism prevents the diopter from falling out of the frame during exchange, while two 1/4 threads permit the frame to be attached to an articulating arm. Note: Limited clearance with some +2 Diopters.

390,00 €*

LMB 4x5 Extra Non-Rotatable Filter Stage

LMB 4x5 Extra Non-Rotatable Filter Stage

An optional non-rotatable third filter stage for the LMB 4x5. Can be used as a stand-alone filter stage with all LMB 4x5 clamp adapters. The LMB 4x5 sunshade can be mounted directly to the front of the filter stage.

380,00 €*

MMB-2 Handles

MMB-2 Handles

330,00 €*

LMB 6x6 Foam Insert

LMB 6x6 Foam Insert

The foam insert for LMB 6x6 fits perfectly into any kind of the Peli Case 1637. It is included in all LMB 6x6 sets (LMB 6x6 Clamp On 3-Stage Set, LMB 6x6 15mm Studio 3-Stage Set, LMB 6x6 19mm Studio 3-Stage Set, LMB 6x6 Pro 15mm Studio Set and LMB 6x6 Pro 19mm Studio Set).

320,00 €*

Mattes for MMB-2, 5 pieces

Mattes for MMB-2, 5 pieces

290,00 €*

Flexible Sunshade Side Flag Holders Set

Flexible Sunshade Side Flag Holders Set

includes:K2.0033772 1x Flexible Sunshade LMB 4x5K2.0036441 1x LMB Side Flag Holders

280,00 €*

LMB 15mm Studio Rod Adapter

LMB 15mm Studio Rod Adapter

A tool-less screw in 15 mm studio support adapter Compatible with following products:K2.0013427 LMB 4x5 15mm Lightweight Support ConsoleK2.0013447 LMB 4x5 Swing Away Tilt ModuleK2.0019275 LMB 6x6 Clamp Adapter 143mmK2.0019156 LMB 6x6 Clamp Adapter 165mmK2.0019085 LMB 6x6 Tilt and Flex Adapter 80-156mm

270,00 €*

LMB 19mm Studio Rod Adapter

LMB 19mm Studio Rod Adapter

A tool-less screw in 19 mm studio support adapter Compatible with following products:K2.0013427 LMB 4x5 15mm Lightweight Support ConsoleK2.0013447 LMB 4x5 Swing Away Tilt ModuleK2.0019275 LMB 6x6 Clamp Adapter 143mmK2.0019156 LMB 6x6 Clamp Adapter 165mmK2.0019085 LMB 6x6 Tilt and Flex Adapter 80-156mm

260,00 €*

LMB 6x6 Tilt and Flex Adapter 80-156mm

LMB 6x6 Tilt and Flex Adapter 80-156mm

The Tilt and Flex Adapter is a flexible rubber donut compatible with lens diameters from above 80mm to less than 156mm. It works perfectly with lenses where lens elements are extending and can compensate the tilting angle when using the Swing Away Tilt Modules from the LMB 6x6. An interface for both LMB 15mm and LMB 19mm Studio Rod Adapters is integrated at the bottom.

240,00 €*

LMB 6x6 Set of Mattes spherical

LMB 6x6 Set of Mattes spherical

A set of 5 hard mattes with different spherical openings that can be clicked into the sunshade of the LMB 6x6 to prevent image quality loss caused by stray light.

240,00 €*

LMB 6x6 Set of Mattes anamorphic

LMB 6x6 Set of Mattes anamorphic

A set of 5 hard mattes with different anamorphic openings that can be clicked into the sunshade of the LMB 6x6 to prevent image quality loss caused by stray light.

240,00 €*

Diopter Adapter 6in to 138mm

Diopter Adapter 6in to 138mm

The diopter adapter is compatible with LMB 6x6 Diopter Stage and Diopter Frame 6 inch and allows the use of 138 mm close-up diopters.

235,00 €*

LMB 4x5 Tilt and Flex Adapter

LMB 4x5 Tilt and Flex Adapter

A flexible rubber donut adapter to use with lenses from small to large diameters (62-143mm), for use with LMB 4x5 swing-away tilt module or with lenses where lens elements are extending. The LMB 4x5 15 mm LWS console can be mounted either on top or at the bottom. Compatible with LMB-25, LMB-5, LMB-15.

210,00 €*

LMB 4x5 Set of Mattes spherical

LMB 4x5 Set of Mattes spherical

This set of Mattes includes 5 Mattes and fits to following Matte Boxes: LMB 4x5, LMB-5, LMB-15, LMB-25, MB-19.

200,00 €*

LMB 4x5 Set of Mattes anamorphic

LMB 4x5 Set of Mattes anamorphic

This set of Mattes includes 5 anam. Mattes and fits to following Matte Boxes: LMB 4x5, LMB-5, LMB-15, LMB-25, MB-19.

200,00 €*

LMB Flag Holders

LMB Flag Holders

A pair of flag holders that can be mounted on the top, bottom, or sides of the LMB 4x5 and LMB 6x6. Also compatible with LMB-25 and LMB-6 (top).

190,00 €*

LMB Accessory Adapter

LMB Accessory Adapter

For 3/8 inch accessories such as ultrasonic devices-compatible with LMB 4x5 / LMB 6x6 / LMB-25 / LMB-6 with the additional sliding possibility for a perfect positioning.

180,00 €*

LMB 4x5 15mm Lightweight Support Console

LMB 4x5 15mm Lightweight Support Console

A screw-in standard 15 mm lightweight support console.Compatible with: LMB 4x5 143 mm clamp adapterLMB 4x5 Tilt and Flex Adapter

155,00 €*

LMB Side Flag Holders

LMB Side Flag Holders

Designed for K2.0033772 Flexible Sunshade LMB 4x5.The LMB side flag holders, which are an alternative to the existing small ones used with the LMB 4x5, offer more real estate at the top and the bottom. Filter tags, which are quite often attached to the sunshade, will not stick to rubber but perfectly to the extended space on the new LMB side flag holders.

150,00 €*

Console 15mm MMB-2

Console 15mm MMB-2

150,00 €*

Diopter Adapter 138mm to 4.5in

Diopter Adapter 138mm to 4.5in

The diopter adapter is compatible with both diopter stage and diopter frame 138mm and allows the use of 4,5 inch close-up diopters.

140,00 €*

LMB 4x5 Foam Insert

LMB 4x5 Foam Insert

The foam insert for LMB 4x5 fits perfectly into the Peli Case 1560 and 1560M. It is included in all LMB 4x5 sets (LMB 4x5 Clamp-On Set 3-Stage, LMB 4x5 15mm LWS Set 3-Stage, LMB 4x5 Pro Set, Upgrade Set LMB-25 to LMB 4x5 Basic, Upgrade Set LMB-25 to LMB 4x5 Pro).

140,00 €*

Flexible Sunshade LMB 4x5

Flexible Sunshade LMB 4x5

The Flexible Sunshade is an alternative to the existing sunshade for the LMB 4x5 out of plastic. The rubber part can be detached in seconds without using any tools. The dimensions of the Flexible Sunshade are exactly the same as those of the plastic sunshade so the same hard mattes from the LMB 4x5 (spherical and anamorphic) can be used.Please use the LMB Side Flag Holders (K2.0036441) in combination with the Flexible Sunshade.

115,00 €*

Top Flag for MMB-1/MMB-2

Top Flag for MMB-1/MMB-2

89,00 €*

3/8in Accessory Shoe

3/8in Accessory Shoe

For 3/8 inch accessories such as ultrasonic devices – compatible with LMB 4x5 / LMB 6x6 / LMB-25 / LMB-6.

67,00 €*

Viewfinder Adapter MMB-2

Viewfinder Adapter MMB-2

With 1/4 inch and 3/8 inch threads.

39,00 €*