The Mitchell Wedge Lock allows quick and tool-free mounting on any flat base tripod. Simply place on the Flat Base, turn the wing screw and the Mitchell Mount is firmly clamped.The Mitchell Wedge Lock Adapter Disk is designed for use with the DRW-1 Base (KK.0021212).Set includes Mitchell Wedge Lock and Mitchell Wedge Lock adapter disk and screws:4 x 3/8 - 16 UNC x 0.875 4 x 1/4-20 UNC8 x 4 x 10 mm6 x 6 x 16 mm
The Multi Support Plate MSP-1 for the TRINITY 2 and Gen.1 allows the use of the TRINITY head as a standalone, handheld, two-axis, fully stabilized gimbal. The MSP-1 includes rosettes which enable the operator to use the Master Grips to steer the TRINITY and to control the camera and lens.The Euro Mount (K2.0010426) and Mitchell Mount (K2.0010427) can be used with the MSP-1 For TRINITY 2 and TRINITY Gen. 1
To speed up the assembly of the stabilized remote head to the BLACK ARM by Flowcine, a second SRH castle nut should be permanently placed in the mount of the BLACK ARM. To do so, a second SRH castle nut is need. Having a spare castle nut is always advisable, in case the original SRH castle nut goes missing.NOTEImperial threadFor 360 EVO and SRH-3 and SRH-360
To speed up the assembly of the stabilized remote head to the BLACK ARM by Flowcine, a second SRH castle nut should be permanently placed in the mount of the BLACK ARM. To do so, a second SRH castle nut is need. Having a spare castle nut is always advisable, in case the original SRH castle nut goes missing.NOTEMetric threadFor SRH-3 and SRH-360
Spare SRH Mitchell mount collar for the Stabilized Remote Head 360 EVO and SRH-3 and SRH-360.Length: 40mm / 1.57inNOTEMetric threadFor 360 EVO and SRH-3 and SRH-360
Longer SRH Mitchell mount collar for the Stabilized Remote Head 360 EVO and SRH-3 and SRH-360. Very useful for special cranes.Length: 45mm / 1.77inNOTEMetric threadFor 360 EVO and SRH-3 and SRH-360
Special Mitchell mount to mount the Stabilized Remote Head 360 EVO and SRH-3 and SRH-360 into heads and dampers with restricted height clearance. The round base plate offers two mounting possitions for the location pin. The threaded collar with a length of 30 mm/1.18in can be replaced with a longer collar (K2.0019297).Thread length: 30mm/1.18inNOTEMetric threadFor 360 EVO and SRH-3 and SRH-360
The vibration isolator for the SRH remote head series combines excellent isolation from dynamic impulses, shocks, and vibrations in an extremely compact and rigid design. Four polymer damping elements absorb unwanted vertical and angular movements in the roll and tilt axes, but keep the pivot axis defined and stable. Therefore, the torque power for the pan axis can be maxed out when needed. The polymer elements are located between two of the three layers of the isolator and can easily be adapted to the requirements of each shot with four knurled adjustment nuts. The vibration isolator for the SRH series allows two types of mounting on the SRH remote heads. With the so-called direct mounting, the vibration isolator can be mounted directly on the base plate of the SRH remote control head, whereby the vibration isolator or the attachment to the crane remains as close as possible to the remote head. In this way, the leverage and the associated load change of the remote head can be kept as low as possible, especially when the remote head is mounted on vehicles. The second way is to use the included classic Mitchell mount adapter. The adapter allows fast changes from a crane to a dolly or to an ISO dampener.includes:K2.0041912 1x Vibration Isolator for SRH, Gen. 2, imperialK2.0041922 1x SRH Mitchell Mount Castle Nut, ImperialK2.0038756 1x Wrench for SRH Castle Nut, Mitchell MountK2.0038758 1x Case for Vibration Isolator for SRH, Gen 2NOTEImperial treadFor 360 EVO and SRH-3 and SRH-360
The vibration isolator for the SRH remote head series combines excellent isolation from dynamic impulses, shocks, and vibrations in an extremely compact and rigid design. Four polymer damping elements absorb unwanted vertical and angular movements in the roll and tilt axes, but keep the pivot axis defined and stable. Therefore, the torque power for the pan axis can be maxed out when needed. The polymer elements are located between two of the three layers of the isolator and can easily be adapted to the requirements of each shot with four knurled adjustment nuts. The vibration isolator for the SRH series allows two types of mounting on the SRH remote heads. With the so-called direct mounting, the vibration isolator can be mounted directly on the base plate of the SRH remote control head, whereby the vibration isolator or the attachment to the crane remains as close as possible to the remote head. In this way, the leverage and the associated load change of the remote head can be kept as low as possible, especially when the remote head is mounted on vehicles. The second way is to use the included classic Mitchell mount adapter. The adapter allows fast changes from a crane to a dolly or to an ISO dampener.includes:K2.0038752 1x Vibration Isolator for SRH, Gen. 2, MetricK2.0024106 1x SRH Mitchell Mount Castle Nut, MetricK2.0038756 1x Wrench for SRH Castle Nut, Mitchell MountK2.0038758 1x Case for Vibration Isolator for SRH, Gen 2NOTEMetric threadFor 360 EVO and SRH-3 and SRH-360
