Short 15 mm to 19 mm rod for the use of the Monitor Mount (K2.0014831). Diameter 15 mm and 19 mm, usable length 80 mm/3.15inFor Transvideo and Monitor Mount for SmallHD (K2.0014832) with the TRINITY Joystick Monitor mount Gen.1.For TRINITY Joystick Monitor mount Gen.1
This steel extenders with an outer diameter of 19mm allows a wide range of applications with the existing counterweights CW-2, CW-3, CW-4 in combination with rod mounting brackets such as the RMB-2, RMB-3, RMB-5, RMB-6, RMB-7, RMB-8. This set includes one extender with a female-female thread and a second extender with a male-female thread.includes:K2.0052729 1x 19mm, 3/8, Extension, Steel, F-FK2.0052728 1x 19mm, 3/8, Extension, Steel, M-F
This steel extender with an outer diameter of 19mm and with a female-female thread allows a wide range of applications with the existing counterweights CW-2, CW-3, CW-4 in combination with rod mounting brackets such as the RMB-2, RMB-3, RMB-5, RMB-6, RMB-7, RMB-8.
This steel extender with an outer diameter of 19mm and with a male-female thread allows a wide range of applications with the existing counterweights CW-2, CW-3, CW-4 in combination with rod mounting brackets such as the RMB-2, RMB-3, RMB-5, RMB-6, RMB-7, RMB-8.
The 3/8in extension allows additional counterweights to be mounted on the TRINITY Pendulum Gen.2. Attaching counterweights to the side of the top and bottom stages TST-1, TST-2, BST-1, BST-2. But also stacking two SAM Zero dovetail plates on top of each other to raise the COG of smaller cameras.For TRINITY Pendulum Gen.2, TST-1, TST-2, BST-1, BST-2, SSB-1, SSB-4, SAM Zero dovetail plate and any application based on a 3/8in thread.
Cylindrical adapter into which an articulated arm with a 1/4 inch thread can be screwed.The adapter can be used in any bracket with clamps for 15mm rods.The adapter has a special counter-screw connection that keeps the articulated arm in position.
Cylindrical adapter into which an articulated arm with a 1/4 inch thread can be screwed.The adapter can be used in any bracket with clamps for 19mm rods.The adapter has a special counter-screw connection that keeps the articulated arm in position.
The new CCB-2 is an inexpensive alternative to the CSS Clamp Bridge 52 K2.0042837, which is used on all ARTEMIS 2 and TRINITY 2 battery mountings. The CCB-2 can be used, for example, to mount the SSB-6 onto the 19mm tubes of the ARTEMIS 2 and TRINITY 2. To use additional accessories, Nato-Rails can also be mounted on the CCB-2.
The set includes the counterweight consisting of two half shells and two Delrin adapters for the 1.8in and the 1.5in center post.The Delrin adapters make it possible to mount the counterweight on both the outer 1.8in post and the 1.5in telescoping inner post.The Counterweight is made of stainless steel.Weight: 800gr / 1.77lbFor ARTEMIS 2, TRINITY 2, artemis Gen.1, TRINITY Gen. 1 and other systems which provides a 1.5in inner post
The set consists of two different counterweights. The larger counterweight weighs 300 g/0.66 lb, the two smaller counterweights weigh 150 g/0.33 lb each. The larger counterweight is equivalent to the weight of a cforce mini motor, making it easier to get difficult camera setups into perfect balance. The 3/8 threads allow the weights to be screwed together, as well as easily attached to the camera. The counterweight can also be clamped to 19 mm rods via an RMB-3 clamp.Weight:300gr / 0.66lb150gr / 0.33lbFor TRINITY 2, TRINITY Gen. 1, 360 EVO, SRH-3, SRH-360, MAXIMA
Clamping bridge that can be clamped onto the rods of the battery hanger of TRINITY 2 as well as TRINITY Gen.1 and artemis Gen.1.For ARTEMIS 2, artemis Gen.1, TRINITY 2, TRINITY Gen. 1
Incl. arm posts 5/8in / 15.8mm Arm post length: 10in / 254mm and 3in / 76mmFits all spring arms and gimbals which are compatible to 5/8in / 15.8mm arm posts
A stainless-steel sleeve with the appropriate diameter, which allows the TIFFEN VOLT gimbal to be placed onto the balance pin of the ARTEMIS docking bracket.The adapter sleeve is mounted on the ARTEMIS docking bracket's balance pin.
The DRW-1 Mounting Base 2 allows existing DRW-1 Digital Remote Wheel, Third Wheel Set (KK.0021211) with the new Controller Mounting Set (KK.0051503).NOTEThe CSS Clamp Bridge 52, 19mm (K2.0042837) is also required for mounting.
The DRW-1, Single Wheel, Mounting Set, allows existing DRW-1 wheels to be used with the new Controller Mounting Set (KK.0051503).includes:K2.0019318 1x DRW-1 Modul Mounting BracketK2.0051132 1x DRW-1 Mounting Base 2K2.0042837 1x CSS Clamp Bridge 52, 19mm
The newly developed 19 mm hinge allows even more precise positioning of the batteries thanks to the finer ARRI rosette. And as soon as the hinge is locked, the batteries are held securely and without any play or vibrations.It is also possible to use two hinges on the ARTEMIS 2 and TRINTY 2. This allows the batteries to be positioned even more freely and creatively.For ARTEMIS 2, TRINITY 2
The NRC-3 has two screws that comply with the classic RMB-3 standard. This means that the NRC-3 can be mounted in existing threads with the RMB-3 spacing.The NRC-3 allows the use of all types of NATO rails.
The SSB-3 bracket can be used to mount the Volt control box to the top stage of the artemis. Alternatively it can be used as a focus bracket which can be mounted at the artemis top stage, or the to SAM plates, or to the CCS dovetail plates.For ARTEMIS 2 and artemis Gen.1
The compact and lightweight Stabilizer System Bracket SSB-4 can be mounted at the top of the ring of the TRINITY 2 on both sides.The SSB-4 allows the following brackets to be mounted: 15mm LWS Rod Console (K2.65264.0)Rod Mounting Bracket RMB-2 (K2.66250.0)Rod Mounting Bracket RMB-3 (K2.0006186)Rod Mounting Bracket RMB-5 (K2.0014827)Rod Mounting Bracket RMB-6 (K2.0020163)Universal Mounting Arm UMA-120 (K2.65020.0)Universal Mounting Arm UMA-240 (K2.41100.0)Accessory Rail Small ARS-1 (K2.0016751)Accessory Rail Bracket ARB-1 (K2.0019444)For TRINITY 2, SAM plates
Additional counterweight for the TRINITY Gen.1. The bracket is mounted at the bottom of the outer ring of the TRINITY Gen.1 and allows 25, 50, or 75 grams of extra weight to be attached. This additional counterweight gives the TRINITY Gen.1 a much better dropdown behavior when the TRINITY is in the horizontal plane.includes:Mounting BracketCounterweight, CW-3, 50gr, 0.110 lbsCounterweight, CW-4, 25gr, 0.055 lbsFor TRINITY Gen. 1 only!
Flexible cheese plate system for mounting the ERM External Radio Module, or a wireless video transmitter / receiver to the 19mm Rods or to the post of the TRINITY 2 / ARTEMIS 2.includes:K2.0048349 1x SSB-6, Stabilizer Systems Bracket 6 extensionK2.0048350 1x SSB-6, Stabilizer Systems Bracket 6Recommended accessories:CSS Clamp Bridge 52, 19mm (K2.0042837)Universal Post Clamp 1.8-1.5in, Gen.2 (K2.0042719)
Special Counterweight Bracket for the DEH-2. Once the focus and zoom controls, such as the OCU-1 & Master Grip Zoom, are attached to the pan bar of the DEH-2, the additional weight at the rear of the DEH-2 must be balanced with counterweights at the front.First attach the SSB-7 to the front of the dovetail plate on the DEH-2, and then attach the counterbalance rods to the SSB-7.In addition, power supply accessories such as the BMS-3 or Video Transmitters can be connected via standard ARRI interfaces.Includes:K2.0048281 1x Stabilizer System Bracket SSB-7K2.0043811 2x Single Support Rod 76mm, 3in, 19mmK2.0048587 2x Cartoni Counterweights Rod 22mm, 2x0,5kgRecommended accessories:BMS-3, Pro Set, V-Mount (KK.0049408) BMS-3, Pro Set, Gold-Mount (KK.0049409)Multicam Monitor bundle VMM-1 & MYS-1 (K0.0039106)
The SSB-9 performs two functions. 1. The well-known CSS counterweights, like the Counterweight, CW-1, 150 g K2.0033569, can be fastened to the SSB-9. The SSB-9 can then be placed at the bottom of all SAM plates and moved on the SAM plate to achieve active balancing of the TRINITY2 and 360 EVO. 2. If you attach two SSB-9s to a SAM Zero plate using 3/8in screws, you can now insert another SAM plate, located under the camera, into the two SSB-9s. This allows the camera to be positioned slightly higher within the inner ring of the 360 EVO.
The compact and lightweight Stabilizer System Bracket SSB-1 can be mounted at the top of the ring of the TRINITY or the MAXIMA. The SSB-1 can also be mounted at the front and back of all SAM plates, and all dovetail plates made for SRH, TRINITY, and MAXIMA.The SSB-1 allows to mount the following brackets:15mm LWS Rod Console (K2.65264.0)Rod Mounting Bracket RMB-2 (K2.66250.0)Rod Mounting Bracket RMB-3 (K2.0006186)Rod Mounting Bracket RMB-5 (K2.0014827)Rod Mounting Bracket RMB-6 (K2.0020163)Universal Mounting Arm UMA-120 (K2.65020.0)Universal Mounting Arm UMA-240 (K2.41100.0)Accessory Rail Small ARS-1 (K2.0016751)Accessory Rail Bracket ARB-1 (K2.0019444)For SRH-3 , TRINITY Gen. 1 and MAXIMA.
Only the 15mm tubes can be used to connect the Top Attachment Bracket TAB-1 (K2.0041117) to the camera at the front. However, if there are no 15mm tubes or if the center of gravity of the camera is unfavorable due to a very long zoom lens, it may not be possible to use the TAB-1 as intended.The new extension for the TAB-1 can help. Alternatively, the base of the TAB-1 can also be mounted on the back of the inner ring of the TRINITY 2 or 360 EVO. Now, you can attach the camera top to the TAB-1 Extension.
The TAB-1 helps stabilizing the camera rigs in some configurations with ARRI CSS. The TAB-1 links top-mounted 15mm LWS camera rods to the top of CSS products such as Trinity 2 and 360 EVO.Using the via the SSB-4 (K2.0044225), the TAB-1 can be mounted to: TRINITY 2, 360-EVO and SRH-360.Using the via the SSB-1 (K2.0035956), the TAB-1 can be mounted to: TRINITY Gen. 1.
