Base Plate for ETERNA 55
435,00 €*
Available, delivery time: on request
Product number:
K2.0055233
Product information "Base Plate for ETERNA 55"
The Base Plate is designed as a Balance Utility Dovetail (BUD) and mounts directly to the underside of the camera. Its integrated dovetail enables extensive fore-aft balancing adjustments when used with all standard shoulder pads, bridge plates, and SAM plates.
Compatible with CBP-5, CBP-6, CSP-2, BPA-6, UAP-4, SAM-5/6/7/8/9 and LTP-1. These accessories can be easily attached by sliding them on or off from the front or rear, with the release button accessible from both sides.
The Base Plate offers a pair of M4 threads on each side to attach the side brackets left and right, and an additional pair of M4 threads on the front side to attach a Lightweight Support LWS-7 as 15 mm rod mounting support.
Compatible with Fujifilm GFX ETERNA 55 camera.
Please note: Due to the height of the Fujifilm ETERNA 55, rods mounted via the Compact Bridge Plates CBP-5/-6 and the BPA-6 are positioned approximately 10 mm below the standard heights defined for 15 mm LWS and 15/19 mm Studio rod standards. To achieve the standard 15 mm LWS height please use the Base Plate for ETERNA 55 together with the LWS-7 for full compatibility. The 19 mm Studio standard height is not supported
| 3rd Party: | Fujifilm ETERNA 55 |
|---|